Unit of competency Outline
Date retreived
22/07/2026 3:25 PM AWST
22/07/2026 3:25 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Licence to operate a forklift truck
Licence to operate a forklift truck
Unit of competency
National Code
TLILIC2001
TLILIC2001
State Code
AWL73
AWL73
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
04/08/2016
Nominal Hours
40
Description
This unit specifies the skills and knowledge required to operate a forklift truck safely.Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other arms that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck.A person performing this work is required to hold a forklift truck high risk work (HRW) licence.This unit requires a person operating a forklift truck to plan the work, conduct routine checks on a forklift truck, shift loads in a safe manner, and safely shut down and secure equipment after completing operations.Licensing/Regulatory InformationThis unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations, HRW and meets Commonwealth, state and territory HRW licensing requirements. Any alteration to this unit would result in a unit that would not be acceptable to work health and safety (WHS)/occupational health and safety (OHS) regulators for the purpose of licensing.
Notes
Elements and Performance Criteria
1 Plan work
- 1.1 Potential workplace hazards are identified
- 1.2 Risk control measures are identified consistent with regulatory requirements and the hierarchy of control
- 1.3 Appropriate forklift truck is selected in accordance with load and workplace conditions
- 1.4 Working area is inspected to determine appropriate paths for moving loads and forklift truck in accordance with workplace conditions
- 1.5 Methods for communicating are identified and confirmed in accordance with workplace procedures
2 Conduct routine checks
- 2.1 Prior to operation, forklift truck is visually checked for any damage or defects
- 2.2 All signage and labels are checked to ensure they are visible and legible, in accordance with the appropriate standard
- 2.3 All controls are located, identified and confirmed
- 2.4 Pre-start operational checks are carried out in accordance with manufacturer specifications and workplace procedures
- 2.5 Forklift truck is started in accordance with manufacturer specifications and workplace procedures, and is checked for any abnormal noise
- 2.6 Post-start operational checks are carried out in accordance with manufacturer specifications and workplace procedures
- 2.7 All forklift truck functions and safety devices are tested to their maximum in accordance with manufacturer specifications and workplace procedures
- 2.8 Issues, defects and damage identified during routine checks are reported and recorded in accordance with workplace procedures, and appropriate action is taken
3 Shift load
- 3.1 Weight of load is assessed to ensure compliance with forklift truck data plate specifications
- 3.2 Appropriate hazard prevention/control measures are implemented and communicated to personnel in the work area
- 3.3 Forklift truck is operated at a safe speed in accordance with manufacturer specifications and workplace procedures
- 3.4 Loads are moved and placed to ensure stability of material and avoidance of hazards
- 3.5 Load movement is monitored constantly to ensure safety of personnel and load, and structural stability
- 3.6 Unplanned and/or unsafe situations are responded to in accordance with workplace procedures and emergency plans
4 Shut down and secure forklift truck
- 4.1 Forklift truck is parked to avoid hazards
- 4.2 Forklift truck is shut down in accordance with manufacturer specifications and workplace procedures
- 4.3 Routine post-operational forklift truck checks are carried out in accordance with manufacturer specifications and workplace procedures
- 4.4 Forklift truck is secured to prevent unauthorised access/use
- 4.5 All defects and damage are reported and recorded in accordance with manufacturer specifications and workplace procedures, and appropriate action is taken
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D5241 | TLILIC2001A | Licence to operate a forklift truck | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAE42 | TLILIC0003 | Licence to operate a forklift truck | Unit of competency |