Qualification Outline
22/07/2026 4:44 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Gas Supply Industry Operations
Certificate III in Gas Supply Industry Operations
UEG30118
BDY3
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 05/09/2018 | Current | Approved |
Description
This qualification provides competencies to conduct gas supply industry activities, including installation, maintenance, fault find and repair, operations of distribution and transmission gas pipelines, cylinders and associated equipment.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
A total of 960 weighting points comprising:- 300 core weighting points listed below; plus
- 660 elective weighting points from the elective units listed below.
Choose a minimum of 660 weighting points elective units from the list below, of which between 0 and 160 weighting points can be taken from Group A, between 0 and 180 weighting points can be taken from Group B, between 0 and 130 weighting points can be taken from Group D; or elective units between 330 and 660 weighting points can be taken from Group C.
Up to 160 weighting points of the elective unitsGroup A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEG CVIG, if not listed weighting points will be 10 points unless directed from the Gas Industry Reference Committee (IRC). The general elective units must contribute to the vocational outcomes of the qualification.
Where imported units are selected, care must be taken to ensure all prerequisite units specified are complied with.
Where a prerequisite unit is attached to a unit, it is identified by this symbol ∟ on TGA / TRAINING PACKAGE DOCUMENTATION.
1. Core Units
All eight units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAD31 | UEGNSG141 | Apply workplace health and safety regulations, codes and practices in the gas supply industry | 18 | Unit of competency |
| OAE23 | UEGNSG132 | Carry out basic work activities in a gas industry work environment | 54 | Unit of competency |
| OAD41 | UEGNSG133 | Comply with environmental policies and procedures in the utilities industry | 36 | Unit of competency |
| AUI32 | BSBFLM303 | Contribute to effective workplace relationships | 30 | Unit of competency |
| AUI54 | BSBFLM312 | Contribute to team effectiveness | 30 | Unit of competency |
| AUK29 | BSBWHS301 | Maintain workplace safety | 20 | Unit of competency |
| AUJ68 | BSBWOR301 | Organise personal work priorities and development | 30 | Unit of competency |
| OAD28 | UEGNSG005 | Prepare to work in the gas industry | 18 | Unit of competency |
2. Group A: Imported and Common Elective Units
Between 0 and 160 weighting points of elective units can be chosen from Group A.
Please refer to the packaging rules for the full details of available options.
3. Group B: General Elective Units
Between 0 and 180 weighting points of elective units can be chosen from Group B.
Please refer to the packaging rules for the full details of available options.
4. Group C: General Elective Units
Between 330 and 660 weighting points of elective units can be chosen from Group C.
Please refer to the packaging rules for the full details of available options.
5. Group D: General Elective Units
Between 0 and 130 weighting points of elective units can be chosen from Group D.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J834 | UEG30114 | Certificate III in Gas Supply Industry Operations | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGL2 | UEG30120 | Certificate III in Gas Supply Industry Operations | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification
Traineeships and Apprenticeships
Part-time is defined as a minimum of 20 hours per week.