Unit of competency Outline
Date retreived
23/07/2026 6:46 PM AWST
23/07/2026 6:46 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out vehicle inspection
Carry out vehicle inspection
Unit of competency
National Code
TLIB0002
TLIB0002
State Code
OAA32
OAA32
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/11/2018
Field of Education
030501 - Automotive Engineering
Original Release Date
05/11/2018
Nominal Hours
20
Description
This unit involves the skills and knowledge required to carry out inspection of a commercial vehicle, including hauling units and any attached trailer, in accordance with relevant workplace procedures. It includes conducting routine checks, cleaning vehicles, ensuring all specified safety requirements are met and ensuring vehicles are operational according to workplace procedures. Work is performed with limited or minimum supervision, and with duty of care for self and others in achieving the prescribed outcomes. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check and clean vehicle
- 1.1 Vehicle hazards are identified and required action is taken to minimise, control or eliminate identified hazards
- 1.2 Visual check of internal and external condition of vehicle is carried out and relevant documentation is completed in accordance with workplace procedures
- 1.3 Pre-operational inspections and checks are conducted in accordance with workplace procedures
- 1.4 Associated equipment is tested to ensure it functions correctly to manufacturer specifications and workplace procedures
- 1.5 Operational checks are carried out after engine is started to identify possible defects
- 1.6 Shutdown checks are carried out to identify possible defects
- 1.7 Warning systems (instruments and gauges) are checked to ensure they are operational in accordance with manufacturer specifications and workplace procedures
- 1.8 Vehicle monitoring device, including In Vehicle Monitoring System (IVMS) and telematics, are logged on/off as required in accordance with manufacturer instructions and workplace procedures
- 1.9 Vehicle is cleaned in accordance with work health and safety (WHS)/occupational health and safety (OHS) and environmental requirements and workplace procedures
2 Complete documentation
- 2.1 Vehicle defects are identified and diagnosed, and appropriate action is taken to report to relevant person/s or remedy identified defects as required by workplace procedures
- 2.2 Records of inspection are updated and recommended repairs from relevant person/s are documented in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWN29 | TLIB2004 | Carry out vehicle inspection | Unit of competency |