Unit of competency Outline
Date retreived
23/07/2026 2:00 AM AWST
23/07/2026 2:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Control traffic with stop-slow bat
Control traffic with stop-slow bat
Unit of competency
National Code
RIIWHS205D
RIIWHS205D
State Code
WH754
WH754
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030909 - Transport Engineering
Original Release Date
29/05/2014
Nominal Hours
4
Description
This unit describes a participant’s skills and knowledge required to control traffic with stop-slow bat in the Resources and Infrastructure Industries.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.
Notes
Elements and Performance Criteria
1. Plan and prepare
- 1.1 Access, interpret and apply site traffic plan procedures and ensure the work activity is compliant
- 1.2 Obtain, confirm, clarify and apply work instructions
- 1.3 Obtain, confirm, clarify and apply safety requirements
- 1.4 Identify, obtain and implement signage and devices
- 1.5 Select tools and equipment, check for serviceability and rectify or report any faults
- 1.6 Identify, confirm, clarify and apply environmental protection requirements
2. Control traffic
- 2.1 Position or confirm temporary traffic signs and barriers
- 2.2 Direct traffic correctly
- 2.3 Control vehicles and pedestrian traffic and ensure safety
- 2.4 Monitor traffic, make adjustments for changing conditions and position waiting vehicles for smooth traffic flow
- 2.5 Use hand held stop/slow bats
- 2.6 Use visibly clear and unobstructed hand signals
- 2.7 Report traffic offenders
3. Operate communication devices
- 3.1 Adjust communication device controls for optimum reception/transmission results
- 3.2 Transmit messages clearly and concisely
- 3.3 Maintain communication device power supply
- 3.4 Check communications contact after nominated period of non-contact
4. Clean up
- 4.1 Remove or cover signs and devices sequentially to provide warning to motorists during shutdown
- 4.2 Clean, check, maintain and store tools and equipment
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB353 | RIIOHS205A | Control traffic with stop-slow bat | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBM75 | RIIWHS205E | Control traffic with stop-slow bat | Unit of competency |