Unit of competency Outline
Date retreived
23/07/2026 8:08 AM AWST
23/07/2026 8:08 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Investigate incidents
Investigate incidents
Unit of competency
National Code
PMAWHS310
PMAWHS310
State Code
AXM16
AXM16
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
061301 - Occupational Health And Safety
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to investigate incidents in the workplace. These incidents can vary from large to small, completely internal or partially externally coordinated. They include all types of incidents and emergencies (e.g. process, work health and safety (WHS), and environmental).An incident is an event which causes, or could have caused, injury or illness; damage to plant, material or the environment; disruption to production or public alarm.An incident is an unintended event, or an unintended consequence of an intended event, such as: fire and explosionloss of containmentexcursions above/below acceptable limits for emissions or plant conditionsexcursions above occupational hygiene or biological exposure limitsnon-compliance with regulatory requirementssecurity breachesfailure to follow procedurescomplaintsvehicle incidentson/off-site incidents.This unit of competency applies to operators who are required to secure the incident site, identify and examine a range of evidence to determine likely cause of incident, record evidence and analyse results to identify improvements to procedures/processes.This unit of competency applies to experienced operators, technicians, supervisors, and those in similar roles who undertake internal investigations of minor incidents and/or who assist in external investigations of more major incidents.The exact definition of the scope of responsibility will depend on company policy, as will the level of the person undertaking these investigations. These investigations will be in accordance with company procedures for such investigations which will be consistent with any relevant regulations.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members.This unit of competency applies to all work environments and sectors within the industry.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Review incident
- 1.1 Undertake site inspections of incident scene
- 1.2 Communicate with relevant personnel regarding specific aspects of the incident
- 1.3 Monitor corrective action procedures
- 1.4 Communicate changes to the situation to appropriate personnel
2 Record investigation process and results
- 2.1 Establish and secure boundaries of the incident scene to prevent contamination of prospective evidence/exhibits.
- 2.2 Identify and interview persons relevant to the incident
- 2.3 Identify and record evidence/exhibits at the scene prior to examination to ensure continuity
- 2.4 Assess relevant information, documentation and evidence/exhibits
- 2.5 Determine point of origin and most likely cause of incident
- 2.6 Determine risk factors affecting the incident
- 2.7 Identify and analyse a range of other possible causes
- 2.8 Identify and utilise support services to investigate the incident scene
- 2.9 Process, record and communicate information/evidence/exhibits, forms and documents to appropriate personnel following enterprise policies and procedures
3 Make suggestions to improve incident handling and prevention
- 3.1 Identify and assess tactical factors and resulting priorities occurring during the incident
- 3.2 Formulate appropriate suggestions to improve handling of similar incidents based upon information available
- 3.3 Identify incident cause and make recommendations to prevent a recurrence
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W8830 | PMAOHS310B | Investigate incidents | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFU2 | DEF30220 | Certificate III in Explosive Ordnance Manufacture | Qualification |
| BDY6 | UEG40118 | Certificate IV in Gas Supply Industry Operations | Qualification |
| BHJ3 | UEG40221 | Certificate IV in Gas Supply Industry Operations | Qualification |
| BGL2 | UEG30120 | Certificate III in Gas Supply Industry Operations | Qualification |
| BHJ2 | UEG30121 | Certificate III in Gas Supply Industry Operations | Qualification |
| BIL6 | UEG40222 | Certificate IV in Gas Supply Industry Operations | Qualification |
| BGK8 | UEG40220 | Certificate IV in Gas Supply Industry Operations | Qualification |
| BDY3 | UEG30118 | Certificate III in Gas Supply Industry Operations | Qualification |
| AD589 | PMASS00020 | Incident response commander | Skill set |
| BAM8 | PMA30116 | Certificate III in Process Plant Operations | Qualification |
| BGB2 | PMA30120 | Certificate III in Process Plant Operations | Qualification |
| BAN0 | PMA40116 | Certificate IV in Process Plant Technology | Qualification |