Unit of competency Outline

Date retreived
23/07/2026 12:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipment

Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipment

Unit of competency
National Code
UEGNSG806
State Code
OAD49
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/09/2018
View on TGA
State Implementation and Classification
Approved Date
04/01/2019
Field of Education
040327 - Plumbing
Original Release Date
04/01/2019
Nominal Hours
90
Description
This unit involves the skills and knowledge required to maintain supervisory control and data acquisition system (SCADA) controlled gas distribution and transmission station facilities in accordance with relevant legislation, codes of practice, regulations and workplace procedures.It includes gas station maintenance of equipment, including remotely operated and controlled valves, air loaded and SCADA controlled regulators, Coriolis, and ultrasonic and electronic meters.This unit applies to the following types of gas stations, subject to work health and safety (WHS)/occupational health and safety (OHS) and duty of care requirements being met for the workplace:compressor stationscustody transfer stationsinlets and city gatesscraper stationsgas storage facilitiesSCADA controlled main line valvesThe skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Competency development activities in this unit are subject to regulations directly related to licencing. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to WHS/OHS regulations.
Notes
Elements and Performance Criteria
1 Prepare SCADA controlled gas flow and pressure equipment and electronic gas measurement equipment
  • 1.1 WHS/OHS and environmental control measures for the gas station site are identified, obtained and applied
  • 1.2 Work requirements are interpreted from plans, specifications and instructions
  • 1.3 Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s to determine and confirm work schedule and respective responsibilities
  • 1.4 WHS/OHS, environmental and sustainable energy policies and workplace procedures are determined and confirmed
  • 1.5 Hazards are identified, WHS/OHS and risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures
  • 1.6 Scope of responsibility under the relevant work permits and/or relevant notification is determined and confirmed to access, isolate/de-energise systems and perform work in accordance with job requirements and workplace procedures
  • 1.7 Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, scheduled, obtained and checked for correct operation and safety
  • 1.8 Appropriate person/s are consulted to ensure work activity is coordinated effectively with person/s involved
  • 1.9 Materials, plans, diagrams, drawings and resources required for work are confirmed, scheduled and obtained in accordance with workplace procedures
  • 1.10 Relevant responsibilities associated with first aid and related workplace safety procedures at the work site are identified, checked and confirmed
  • 1.11 Third-party issues are referred to appropriate person/s in accordance with workplace procedures
  • 1.12 Site preparation, safety plan and work schedule are confirmed in accordance with workplace procedures
2 Maintain SCADA controlled gas flow and pressure equipment and electronic gas measurement equipment
  • 2.1 WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out work activities are followed
  • 2.2 Gas detectors are used to determine work site gas concentration levels and to locate and pinpoint any escaping gas, and supervisor advised immediately if site is unsafe in accordance with workplace procedures
  • 2.3 Appropriate materials, tools, equipment and measuring devices are selected and used safely in accordance with workplace procedures
  • 2.4 Hazardous activities are conducted safely in accordance with given instructions and to requirements
  • 2.5 Work is carried out efficiently, to required industry standard, without waste of materials or damage to apparatus, circuits, and the surrounding environment or services using sustainable energy principles
  • 2.6 Hazard warnings and safety signs are identified and assessed as part of WHS/OHS risks and incident control measures and are reported to authorised person/s for directions in accordance with workplace procedures
  • 2.7 Electrical isolations are scheduled, and local/remote control actuated and communicated in accordance with workplace procedures
  • 2.8 Data on system performance, usage and unplanned events is collected, reviewed and reported in accordance with workplace procedures
  • 2.9 Gas station venting and purging operations are undertaken in accordance with workplace procedures
  • 2.10 Gas flow regulator and meter runs, and components are set up and operated, and system is vented, purged and pressurised in accordance with workplace procedures
  • 2.11 Process variables and set points are taken and required adjustments and repairs are carried out in accordance with workplace procedures
  • 2.12 Actuators are isolated/ de-energised in accordance with manufactures instructions and workplace company procedures
  • 2.13 Procedures for referring non-routine events to the authorised person/s for directions are followed
  • 2.14 Routine work activity quality checks are carried out in accordance with workplace instructions
3 Complete SCADA maintenancework and relevant documentation
  • 3.1 WHS/OHS risk control work completion measures and procedures are followed
  • 3.2 Work site is tidied and made safe in accordance with workplace procedures
  • 3.3 Tools, equipment and surplus resources and materials are cleaned, checked and securely stored
  • 3.4 Appropriate person/s are notified of work completion in accordance with workplace procedures
  • 3.5 Work completion documentation is completed accurately and provided to appropriate person/s in accordance with workplace procedures
No information
No information