Unit of competency Outline
Date retreived
22/07/2026 1:07 AM AWST
22/07/2026 1:07 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Control minor incidents
Control minor incidents
Unit of competency
National Code
MSMWHS205
MSMWHS205
State Code
AWC14
AWC14
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
061301 - Occupational Health And Safety
Original Release Date
04/05/2016
Nominal Hours
26
Description
This unit of competency covers the skills and knowledge required to control minor incidents. The general purpose of this initial response is to prevent any incident from escalating. In the event of an incident this person may be expected to respond to an incident team member in accordance with procedures.The unit of competency applies to most operations personnel and some non-operations personnel. It covers skills and knowledge beyond what is typically covered in an induction program, but does not require specialist training, such as is given to members of an incident response team. Generally the person would be part of a team during an incident response. However, he/she may be required to take independent action. At all times they would be liaising and cooperating with other members of the team.This unit applies to all sectors of the industry.This unit will assist individuals to meet some of their obligations under relevant state/territory legislation. However, the unit must be contextualised to ensure compliance with specific regulatory requirements that may apply in a sector, jurisdiction, or type of organisation. Organisations within the chemical, hydrocarbons and refining industries may find themselves falling under the provisions of various Major Hazard Facilities legislation. In developing this unit consideration has been given to the requirements of Sections 8 and 9 of the National Standard for the Control of Major Hazard Facilities [NOHSC:1014 (2002)] and the National Code of Practice for the Control of Major Hazard Facilities [NOHSC:2016 (1996)].This unit does NOT apply to more significant incidents where higher levels of incident response competencies may be required. No other licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Evaluate the incident
- 1.1 Recognise an incident has occurred or is about to occur
- 1.2 Assess the incident for type of response and the likely effectiveness of first response action
- 1.3 Identify the hazards arising from the incident
- 1.4 Raise the alarm and seek assistance as required
- 1.5 Select appropriate response to control incident
- 1.6 Determine hazard control measures to be employed
- 1.7 Recommend evacuation if appropriate
2 Control the incident
- 2.1 Maintain personal safety at all times
- 2.2 Confine the incident to the area of origin where possible
- 2.3 Select appropriate equipment to control incident
- 2.4 Use equipment in accordance with procedures
- 2.5 Clear and secure the incident area
- 2.6 Monitor the incident and surrounding conditions and modify response as appropriate
- 2.7 Hand over to specialist incident response personnel as appropriate
3 Conclude the incident control
- 3.1 Report the use of equipment according to procedures
- 3.2 Mark or position incident control equipment after use to indicate it requires servicing or replacing
- 3.3 Participate in incident debrief and report in accordance with procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W8250 | MSAPMOHS205A | Control minor incidents | Unit of competency |