Qualification Outline
22/07/2026 9:20 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Recreational Vehicle Manufacturing
Certificate III in Recreational Vehicle Manufacturing
MSM31115
AZG8
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 6.00 | 05/05/2021 | Current | Approved |
| 5.00 | 04/09/2020 | Replaced | Approved |
| 4.00 | 22/10/2018 | Replaced | Approved |
| 3.00 | 12/01/2017 | Replaced | Approved |
| 2.00 | 02/06/2016 | Replaced | Approved |
| 1.00 | 15/12/2015 | Replaced | Approved |
Description
The MSM31115 Certificate III in Recreational Vehicle Manufacturing has been developed as a trade-level qualification. People with this qualification would be expected to work under supervision manufacturing recreational vehicles, including:
motor homes
caravans
camper trailers
slide-ons
fifth wheelers
to meet Australian requirements, such as road worthiness and the Australian Design Rule (ADR).
They may work in a large manufacturing organisation or a smaller workshop.
There are no specific licenses that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements depending on the work context. Local regulations should be checked for details.
Schedule
Packaging Rules
To be awarded the MSM31115 Certificate III in Recreational Vehicle Manufacturing, competency must be achieved in twenty-two (22) units of competency:- three (3) core units of competency
- nineteen (19) elective units of competency, as specified below:
- a minimum of eight (8) units of competency must be selected from Group A
- the balance of units, to a maximum of eleven (11) may be selected from:
- units not previously selected from Group A
- Group B units listed below.
Note: Up to four (4) elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified in Groups A and B.
Note: Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification.
1. Core units
All three (3) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWC20 | MSMSUP102 | Communicate in the workplace | 26 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| AWC15 | MSMWHS200 | Work safely | 26 | Unit of competency |
2. Group A Elective units
A minimum of eight (8) units of competency must be selected from Group A.
Please refer to the packaging rules for the full details of available options.
3. Group B Elective units
Up to eleven (11) units may be selected from Group B.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W953 | MSA30610 | Certificate III in Recreational Vehicle Manufacture | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BJC9 | MSM31122 | Certificate III in Recreational Vehicle Manufacturing | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships