Unit of competency Outline

Date retreived
23/07/2026 7:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and refit body moulding

Remove and refit body moulding

Unit of competency
National Code
MSMRV365
State Code
AWC17
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
04/05/2016
Nominal Hours
10
Description
This unit of competency covers the skills and knowledge required to remove and refit body moulding on a recreational vehicle. The same moulding may be replaced, or the removed moulding may be replaced with a different moulding. The work will be carried out in a recreational vehicle manufacturing or service and repair facility.This unit of competency covers the preparation for, removal of, refitting of, and clean-up after the removal and refitting of a moulding.The operator will be required to work to procedures, and follow plans/specifications, insurance requirements and customer needs. This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work
  • 1.1 Review the requirements of the work, including insurance requirements and customer needs
  • 1.2 Examine moulding, determine what needs to be done and how to do it
  • 1.3 Check required tools and jigs are available at the worksite
  • 1.4 Check required materials and components are available at the worksite
  • 1.5 Identify any hazards and the related hazard controls
  • 1.6 Check that hazard controls are in place and operational
  • 1.7 Query any items that are different to usual and clarify requirements
2 Remove moulding in accordance with devised procedures
  • 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
  • 2.2 Remove moulding maximising the potential for reuse
  • 2.3 Segregate and handle waste in accordance with procedures
  • 2.4 Temporarily store moulding and components which are to be reused
3 Refit moulding in accordance with devised procedures
  • 3.1 Use relevant hazard controls, including PPE
  • 3.2 Refit moulding in accordance with the devised procedure
  • 3.3 Trim as required
  • 3.4 Ensure moulding is attached as required
4 Finish removal and refitting of moulding
  • 4.1 Check moulding has been refitted correctly and make any required adjustments
  • 4.2 Clean up recreational vehicle and make ready for return to customer
  • 4.3 Clean up work area, leaving it ready for the next job
  • 4.4 Segregate and handle waste in accordance with procedures
  • 4.5 Complete any required documentation/records
No information
No information
Replaced By
State Code National Code Title Type
OFD46 MSMRV383 Repair recreational vehicle windows, doors and external items Unit of competency