Unit of competency Outline

Date retreived
22/07/2026 6:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit 12 V cable systems in a recreational vehicle

Fit 12 V cable systems in a recreational vehicle

Unit of competency
National Code
MSMRV313
State Code
AWC46
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
04/05/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to fit 12 V cable systems in a recreational vehicle. The work will be carried out in a recreational vehicle manufacturing facility.This unit of competency covers the preparation for, fitting of and clean-up after the fitting of the 12 V cable system.The operator will be required to work to procedures, and follow plans/specifications for what is required.This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work
  • 1.1 Review the requirements of the work
  • 1.2 Check required tools and jigs are available at the worksite
  • 1.3 Check required cable is available at the worksite
  • 1.4 Check the 12 V installations/appliances have been installed
  • 1.5 Identify any hazards and the related hazard controls
  • 1.6 Check the hazard controls are in place and operational
  • 1.7 Query any items that are different to usual and clarify requirements
2 Fit the 12 V cable system in accordance with procedures
  • 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
  • 2.2 Run cable from supply to installation/appliance
  • 2.3 Run cable to/from circuit breakers
  • 2.4 Terminate cable as required
  • 2.5 Drill holes/make any penetrations required in frame
  • 2.6 Fix all cables in position as required
  • 2.7 Complete fitting of cable as required
3 Finish 12 V cable system fit
  • 3.1 Check 12 V cable system has been fitted correctly and make any required adjustments
  • 3.2 Clean up recreational vehicle and work area, leaving it ready for the next job
  • 3.3 Segregate and handle waste in accordance with procedures
  • 3.4 Complete any required documentation/records
No information
No information
Replaced By
State Code National Code Title Type
OFD53 MSMRV373 Rough-in and fit-off recreational vehicle extra-low-voltage electrical systems Unit of competency