Unit of competency Outline

Date retreived
22/07/2026 1:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply trim to vehicle components

Apply trim to vehicle components

Unit of competency
National Code
AUMGTT001
State Code
WH974
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
11/03/2014
Nominal Hours
12
Description
This unit describes the performance outcomes required to measure, cut and attach trim materials to vehicle components.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Work orders, job specifications and working drawings are identified, interpreted and confirmed
  • 1.2 Trim materials, tools and equipment are selected and inspected, and faults repaired or reported
2. Match materials
  • 2.1 Trim materials are matched, measured and cut according to job specifications and workplace procedures
  • 2.2 Material characteristics are identified and selected for use
  • 2.3 Attaching or bonding informationis identified and interpreted from appropriate sources
3. Attach materials
  • 3.1 Workplace procedures are identified and followed
  • 3.2 Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications
  • 3.3 Trim materials are attached to components by approved methods
4. Complete work processes
  • 4.1 Tools and equipment are cleaned, inspected and stored according to workplace procedures
  • 4.2 Faulty equipment is identified, reported and tagged
  • 4.3 Work areas are cleaned, and unused materials stored
  • 4.4 Waste materials are removed and disposed of or recycled according to workplace environmental procedures
  • 4.5 Work sheets are completed according to workplace procedures
No information
No information
No information