Unit of competency Outline

Date retreived
22/07/2026 7:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate and install canvas products for automotive and marine components

Fabricate and install canvas products for automotive and marine components

Unit of competency
National Code
AURVTT015
State Code
AWZ06
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to fabricate and install canvas covers and products in automotive and marine components. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials and checking their quality, measuring and cutting canvas products, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to fabricate canvas products
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Canvas materials are selected and inspected for quality and quantities are calculated
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability
  • 1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Cut, fabricate and install canvas covers and products
  • 2.1 Materials are measured, marked out and cut according to job requirements and workplace instructions
  • 2.2 Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements
  • 2.3 Canvas products are assembled according to workplace procedures and safety and environmental requirements
  • 2.4 Installation methods for canvas products are identified and applied according to work instructions
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF567 AURVTT3015 Fabricate canvas products Unit of competency