Unit of competency Outline
Date retreived
22/07/2026 10:28 AM AWST
22/07/2026 10:28 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate four wheel drive vehicle
Operate four wheel drive vehicle
Unit of competency
National Code
TLIC2025
TLIC2025
State Code
AWN02
AWN02
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
04/08/2016
Nominal Hours
40
Description
This unit involves the skills and knowledge required to operate a four wheel drive vehicle safely in a range of conditions in accordance with the relevant state/territory legislated roads and traffic licence requirements.It includes driving a four wheel drive vehicle on roads, traversing gradients, ascending and descending steep gradients, and operating in rugged terrain. It also includes using vehicle equipment/controls and completing pre- and post-operational checks.Recognised driver’s licence or provisional car licence must be held prior to commencing this unit of competency. Driving involves the application of four wheel drive vehicle operating principles and procedures to maintain the safety and operation of a four wheel drive vehicle across a variety of on-road and off-road contexts.Driving is performed with limited supervision, and with duty of care responsibility for self and others in achieving the prescribed outcomes.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Operate four wheel drive vehicles on roads
- 1.1 Pre-start checks of vehicle and equipment are carried out in accordance with manufacturer specifications and roadworthy requirements
- 1.2 Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards
- 1.3 Tyres are checked for pressure suitable for terrain and/or changed in accordance with manufacturer and workplace procedures
- 1.4 Vehicle fuel, water and any ancillary equipment are checked before starting vehicle journey in accordance with manufacturer and workplace procedures
- 1.5 Loads are secured in accordance with workplace and legislative requirements
- 1.6 Vehicle is driven on-road and off-road in accordance with legislative and workplace requirements, at appropriate operating speeds for road or track conditions and hazards
- 1.7 Vehicle equipment/controls are set and operated in accordance with manufacturer instructions for operation in surrounding terrain
- 1.8 Road conditions are constantly monitored, negotiated and appropriate operations and control techniques are used to ensure safe vehicle operation and no injury to people or damage to vehicle, tracks or loads is sustained
- 1.9 Vehicle is parked and shut down in accordance with workplace and manufacturer requirements
2 Operate vehicle on, or across a gradient
- 2.1 Intended vehicle path is inspected prior to negotiating gradient
- 2.2 Loads are secured in accordance with workplace and legislative requirements
- 2.3 Appropriate gear and/or range are selected and engine revolutions are maintained to ensure constant traction
- 2.4 Vehicle is driven on-road and off-road in accordance with legislative and workplace requirements at appropriate speeds for conditions and gradient hazards
- 2.5 Vehicle equipment/controls are set and operated in accordance with manufacturer instructions for operation in, on or across a gradient
- 2.6 Gradient conditions are constantly monitored, and appropriate operations and control techniques are used to ensure safe vehicle operation and no injury to people or damage to vehicle, tracks or loads is sustained
3 Operate vehicle ascending a steep gradient
- 3.1 Intended vehicle path is inspected prior to negotiating ascent
- 3.2 Appropriate gear and/or range are selected to ascend grade, and engine revolutions are maintained to ensure constant traction
- 3.3 Vehicle equipment/controls are set and operated in accordance with manufacturer instructions for operation while ascending a steep gradient
- 3.4 Stall recovery techniques are applied in accordance with manufacturer and workplace procedures
- 3.5 Ascent conditions are constantly monitored, and appropriate operations and control techniques are used to ensure safe vehicle operation and no injury to people or damage to vehicle, tracks or loads is sustained
4 Operate vehicle descending a steep gradient
- 4.1 Intended vehicle path is inspected prior to negotiating gradient
- 4.2 Appropriate gear and/or range are selected to descend grade, and engine revolutions are maintained to ensure constant traction
- 4.3 Vehicle equipment/controls are set and operated in accordance with manufacturer instructions for operation while descending a steep gradient
- 4.4 Stall recovery techniques are applied in accordance with manufacturer and workplace procedures
- 4.5 Descent conditions are constantly monitored, and appropriate operations and control techniques are used to ensure safe vehicle operation and no injury to people or damage to vehicle, tracks or loads is sustained
5 Operate vehicle in rugged terrain
- 5.1 Intended vehicle path is inspected prior to negotiating rugged terrain
- 5.2 Appropriate gear and/or range are selected to negotiate rugged terrain and engine revolutions are maintained to ensure constant traction
- 5.3 Vehicle equipment/controls are set and operated in accordance with manufacturer instructions for operation in surrounding terrain
- 5.4 Vehicle chains are fitted in accordance with manufacturer instructions and environmental conditions, as required
- 5.5 Vehicle load is inspected, positioned and secured to maximise traction for four wheel driving
- 5.6 Rugged conditions are constantly monitored, and appropriate operations and control techniques are used to ensure safe vehicle operation and no injury to people or damage to vehicle, tracks or loads is sustained
6 Complete operations
- 6.1 Vehicle is parked and shut down in accordance with workplace and manufacturer requirements
- 6.2 Faults or malfunctions are corrected and/or reported in accordance with manufacturer and workplace requirements
- 6.3 Vehicle and equipment are cleaned and stored after use in accordance with workplace requirements
- 6.4 Documentation and journey reports are completed in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D5018 | TLIC2025A | Operate four wheel drive vehicle | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| ODQ16 | TLIC0023 | Operate four wheel drive vehicle | Unit of competency |