Unit of competency Outline

Date retreived
22/07/2026 1:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Process meter reading information using appropriate technology

Process meter reading information using appropriate technology

Unit of competency
National Code
UEGNSG711
State Code
OAD96
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/09/2018
View on TGA
State Implementation and Classification
Approved Date
04/01/2019
Field of Education
080905 - Practical Computing Skills
Original Release Date
04/01/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to select and use appropriate technology to process meter reading information and maintain technology.It includes the use of relevant tools and equipment, including hand held or wireless/remote recording equipment, computers, computer software and relevant applications and discs, drives and back-up systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Select and use technology to record information
  • 1.1 Work instructions are obtained and confirmed with relevant person/s
  • 1.2 Job requirements and workplace procedures are obtained and discussed with relevant person/s to confirm the work schedule
  • 1.3 Work health and safety (WHS)/occupational health and safety (OHS), environmental and sustainable energy policies and procedures are obtained applied in accordance with workplace procedures
  • 1.4 Recommendations to assist others with processing meter reading work are made in accordance with workplace procedures
  • 1.5 Hazards are identified, risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
  • 1.6 Scope of responsibility under the relevant work permits/authorisations are obtained and confirmed with relevant person/s in accordance with job requirements and workplace procedures
  • 1.7 Technical equipment and tools required for the work are obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
  • 1.8 Responsibilities for work safety and emergency procedures at the work site are confirmed with relevant person/s and job requirements
  • 1.9 Client issues are referred to relevant person/s in accordance with industry standards and workplace procedures
  • 1.10 Work site preparation, safety plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures
2 Processmeter reading information
  • 2.1 WHS/OHS risk control measures, schedule of work and workplace procedures are followed
  • 2.2 Relevant materials, tools, equipment and devices are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
  • 2.3 Information processing is carried out to the required quality standard, without damage to apparatus, equipment, and the surrounding environment or services using sustainable energy principles
  • 2.4 Data is stored, updated and retrieved using relevant technology in accordance with job instructions and workplace procedures
  • 2.5 Hazard warnings and safety signs are recognised and newly identified hazards and WHS/OHS risks are assessed and reported to relevant person/s for directions in accordance with workplace procedures
  • 2.6 Unplanned events or conditions are referred to relevant person/s for directions in accordance with workplace procedures
  • 2.7 Relevant manuals, manufacturer instructions and websites are consulted to assist with solving problems encountered when processing meter readings in accordance workplace procedures
  • 2.8 Quality and accuracy checks of the work are undertaken in accordance with job instructions and workplace procedures
3 Maintain technology
  • 3.1 WHS/OHS risk control measures for work completion are followed
  • 3.2 Accidents and incidents are actioned and reported to relevant person/s in accordance with workplace procedures
  • 3.3 Work area is tidied and made safe in accordance with job instructions and workplace procedures
  • 3.4 Minor maintenance of meter reading technology/equipment is undertaken, as required, in accordance with workplace procedures and manufacturer specifications
  • 3.5 Technology consumables are identified and any surplus resources and materials are checked, cleaned and securely stored in accordance with workplace procedures
  • 3.6 Relevant person/s are notified of work completion in accordance with workplace procedures
  • 3.7 Work completion records and equipment faults are reported in accordance with job instructions and workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WJ069 UEGNSG711A Process meter reading information using appropriate technology Unit of competency
Replaced By
State Code National Code Title Type
ODQ52 UEGNSG709 Process meter reading information using appropriate technology Unit of competency