Unit of competency Outline

Date retreived
22/07/2026 7:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut material with a pole saw

Cut material with a pole saw

Unit of competency
National Code
FWPCOT2240
State Code
AXL64
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
20
Description
This unit of competency describes the outcomes required to cut materials at a distance reachable with manual blade and power driven pole-mounted chain saws to unblock components of machinery.The unit applies to those who operate a pole saw in a saw mill or timber processing environment.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to cut and unblock materials
  • 1.1 Review work order and clarify with appropriate personnel.
  • 1.2 Select pole saw, and check for operational effectiveness.
  • 1.3 Select and use personal protective and safety equipment appropriate to work requirements.
  • 1.4 Carry out pre start-up checks, equipment set-up and adjustments in line with site requirements and to suit cutting conditions.
  • 1.5 Apply and follow equipment lock-out procedures.
2. Assess materials
  • 2.1 Establish and maintain communication with others in work area to ensure safety.
  • 2.2 Assess location and stability of materials for conditions likely to affect safety of cutting activities.
  • 2.3 Identify materials unable to be cut safely and refer to appropriate personnel.
3. Use pole saw to cut and unblock materials
  • 3.1 Operate pole saw to safely cut and remove materials.
  • 3.2 Adjust cutting technique in response to equipment requirements and allowances.
  • 3.3 Ensure blockage is removed whilst complying with safe work practices.
  • 3.4 Clear waste and debris from the site in line with standard operating procedures and environmental requirements.
4. Maintain equipment
  • 4.1 Clear pole saw of dust, shavings and debris.
  • 4.2 Check chain for serviceability, including worn or damaged condition.
  • 4.3 Remove, sharpen, tension, adjust, replace and lubricate chain and other components in line with manufacturer recommendations.
  • 4.4 Recycle, reuse or dispose of chain and other components in line with environmental requirements.
  • 4.5 Record and report cutting operations, equipment faults and maintenance activities to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
WF817 FPICOT2240 Cut material with a pole saw Unit of competency
Replaced By
State Code National Code Title Type
OFD26 FWPCOT2270 Cut wood material with pole saw for unblocking machinery components Unit of competency