Unit of competency Outline

Date retreived
23/07/2026 11:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Protect leadlight and stained glass

Protect leadlight and stained glass

Unit of competency
National Code
MSFDG3001
State Code
OAK02
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
30
Description
This unit describes the skills and knowledge required to protect leadlight and stained glass for security, environmental and heritage purposes.This unit applies to individuals working with designed glass.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify protection requirements
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Inspect and determine the process for achieving protection of the leadlight and stained glass
  • 1.3 Identify types and quantities of materials required for the protection of leadlight and stained glass from plans or work instructions
  • 1.4 Determine work sequence in a logical order to suit the job
  • 1.5 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
2. Install protection
  • 2.1 Cut, shape and form protection materials to ensure correct size and application
  • 2.2 Install or fit protection materials in accordance with protection requirements
  • 2.3 Identify and rectify problems occurring during the operation.
3. Finalise the protection process
  • 3.1 Inspect glass for quality of work and identify and repair deficiencies
  • 3.2 Clean and store tools, equipment and materials in accordance with workplace procedures
  • 3.3 Clean work area and leave in a safe condition and dispose of or recycle waste in accordance with workplace protocols
  • 3.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI645 MSFSL3002 Protect stained glass and leadlighting Unit of competency