Unit of competency Outline

Date retreived
22/07/2026 3:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Protect stained glass and leadlighting

Protect stained glass and leadlighting

Unit of competency
National Code
MSFSL3002
State Code
WI645
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
040323 - Glazing
Original Release Date
20/06/2014
Nominal Hours
30
Description
This unit of competency covers protecting stained glass and leadlighting for security, environmental and heritage purposes.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify protection requirements
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to leadlight and stained glass operations are verified and complied with
  • 1.2 The process for achieving protection of stained glass and leadlighting is identified
  • 1.3 Types and quantities of materials required for the protection of stained glass and leadlighting are identified from plans or work instructions
2 Prepare to protect stained glass and leadlighting
  • 2.1 Work sequence is determined in a logical order to suit the job
  • 2.2 Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
3 Install protection
  • 3.1 Protection materials are cut, shaped and formed to ensure correct size and application
  • 3.2 Protection materials are installed or fitted
  • 3.3 Problems occurring during the operation are identified and rectified
4 Finalise the protection process
  • 4.1 Protected glass is inspected for quality of work and repaired, as required
  • 4.2 Waste and scrap material are removed for disposal or recycling, as required
  • 4.3 Work area is cleaned and rubbish disposed of, as appropriate
  • 4.4 Tools, equipment and unused materials are cleaned, removed and stored appropriately
  • 4.5 Workplace records are maintained according to workplace procedures
No information
No information
Replaced By
State Code National Code Title Type
OAK02 MSFDG3001 Protect leadlight and stained glass Unit of competency
State Code National Code Title Type
J732 MSF30413 Certificate III in Glass and Glazing Qualification
J751 MSF50113 Diploma of Stained Glass and Leadlighting Qualification