Qualification Outline

Date retreived
22/07/2026 7:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diploma of Stained Glass and Leadlighting

Diploma of Stained Glass and Leadlighting

Qualification
National Code:
MSF50113
State Code:
J751
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
10/12/2013
Approved Date
20/06/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
1096
Duration
3 Semesters
Current Release Number
2.00
Current Release Date
04/03/2016
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 04/03/2016 Current Approved
1.00 10/12/2013 Replaced Approved
Description

This qualification describes the skills and knowledge required to perform advanced design manufacture, repair and installation of stained glass and leadlighting, including heritage conservation.It reflects vocational outcomes for those performing design and manufacture of stained glass and leadlighting job roles, including heritage conservation. Work involves self-directed application of knowledge and skills, with substantial depth in some areas where judgement is required in planning and selecting appropriate equipment, services and techniques for self and others.

There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.

Schedule
Packaging Rules
To be awarded the MSF50113 Diploma of Stained Glass and Leadlighting, competency must be achieved in twenty-five (25) units of competency.
- eleven (11) core units of competency
- fourteen (14) elective units of competency, of which:
- at least one (1) unit must be selected from Group A
- at least four (4) units must be selected from Group B
- at least four (4) units must be selected from Group C
- to five (5) relevant units may be chosen from units in Groups A, B and C not already selected, or units available in this Training Package, other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate IV level (maximum 2 units), Diploma level (maximum 5 units) or Advanced Diploma level (maximum 3 units).

Units selected from other Training Packages and accredited courses via Group D must be relevant to the qualification outcome and not duplicate units available within this qualification.
1. Core Units

All eleven (11) units must be completed.

State Code National Code Title Hours Type
WI504 MSFGG4001 Apply standards and codes of practice for the glass industry 30 Unit of competency
WI643 MSFSL2001 Assemble leadlight and stained glass components 50 Unit of competency
WI496 MSFGG3014 Construct and repair leadlight panels 56 Unit of competency
WI646 MSFSL3003 Fabricate and install residential leadlight and stained glass windows and doors 50 Unit of competency
AWC13 MSMENV272 Participate in environmentally sustainable work practices 20 Unit of competency
W5314 MEM05003B Perform soft soldering 36 Unit of competency
WI647 MSFSL3004 Prepare and install architectural engineered leadlight and stained glass 60 Unit of competency
WI645 MSFSL3002 Protect stained glass and leadlighting 30 Unit of competency
WG732 HLTAID003 Provide first aid 20 Unit of competency
WI483 MSFGG3001 Store and handle glass 20 Unit of competency
WI473 MSFGG2001 Use glass and glazing sector hand and power tools 44 Unit of competency
2. Group A Elective Units

At least one (1) unit must be completed from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
WI653 MSFSL5005 Apply innovation in contemporary leadlight and stained glass 20 Unit of competency
WI649 MSFSL5001 Assess conservation requirements 30 Unit of competency
WI651 MSFSL5003 Conserve heritage leadlight and stained glass 80 Unit of competency
WI652 MSFSL5004 Install heritage leadlight and stained glass 80 Unit of competency
WI650 MSFSL5002 Remove heritage leadlight and stained glass 80 Unit of competency
3. Group B Elective Units

At least four (4) units must be completed from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
D1805 CULMS010B Contribute to the preservation of cultural material 60 Unit of competency
AWH27 CUAPPR405 Develop and discuss ideas for own creative work 30 Unit of competency
AWJ75 CUACAL401 Experiment with techniques to produce calligraphy 60 Unit of competency
WI281 MSFDN5001 Generate and transfer complex computer-aided drawings and specifications 72 Unit of competency
C0319 CUVICS04B Originate and develop a concept 50 Unit of competency
WI276 MSFDN4001 Produce drawings from design concepts 64 Unit of competency
AWK35 CUAACD301 Produce drawings to communicate ideas 40 Unit of competency
WI277 MSFDN4002 Produce line and component production drawings 64 Unit of competency
WI278 MSFDN4003 Produce patterns and templates 36 Unit of competency
AWI96 CUAGRD401 Research and apply graphic design techniques 90 Unit of competency
AWJ42 CUADES403 Research and apply techniques in spatial design 80 Unit of competency
4. Group C Elective Units

At least four (4) units must be completed from Group C.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AUL08 BSBSMB401 Establish legal and risk management requirements of small business 40 Unit of competency
AWC68 MSMENV472 Implement and monitor environmentally sustainable work practices 40 Unit of competency
AUK88 BSBSMB407 Manage a small team 40 Unit of competency
AUH81 BSBSMB406 Manage small business finances 50 Unit of competency
AUL85 BSBSMB403 Market the small business 40 Unit of competency
AUH72 BSBSMB405 Monitor and manage small business operations 50 Unit of competency
AUH17 BSBSMB402 Plan small business finances 50 Unit of competency
AUH57 BSBSMB404 Undertake small business planning 50 Unit of competency
Replaces
State Code National Code Title Type
D676 LMF50311 Diploma of Stained Glass and Leadlighting Qualification
Replaced By
State Code National Code Title Type
BED1 MSF50118 Diploma of Stained Glass and Leadlighting Qualification
VET Info Notes
MSF50113 is EQUIVALENT to LMF50311
Entry Requirements

Not applicable

Traineeships and Apprenticeships
No information