Prepare and install architectural engineered leadlight and stained glass

Unit of competency Outline

Date retreived
22/07/2026 6:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFSL3004

State Code
WI647

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
10/12/2013

View on TGA

State Implementation and Classification

Approved Date

20/06/2014

Field of Education

040323 - Glazing

Original Release Date

20/06/2014

Nominal Hours

Description

This unit of competency covers preparing and installing leadlight and stained glass in structural and other architecturally engineered applications.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking glass and glazing work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).

Notes

Elements and Performance Criteria

1 Identify work requirements

1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to leadlight and stained glass operations are verified and complied with
1.2 Work requirements in the form of type of leadlight and stained glass, frames and the method of fixing are identified, confirmed and clarified with appropriate personnel
1.3 The process for preparing and installing architecturally engineered leadlight and stained glass is identified

2 Prepare for installation

2.1 Work sequence is determined in a logical order to suit the job
2.2 Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
2.3 Components of the leadlight and stained glass are checked against specifications or job order
2.4 Leadlight and stained glass fixing method is selected
2.5 Frame or opening is prepared to receive leadlight and stained glass
2.6 Fixing and sealing materials are prepared by mixing or cutting to length, as appropriate

3 Identify site conditions and constraints

3.1 Site safety hazards are recognised and corrective action taken to reduce risk of injury to self and others
3.2 On-site difficulties are identified and addressed in accordance with regulations and enterprise agreements
3.3 Special characteristics of the leadlight and stained glass aperture are identified in relation to the effect of the fitting process on the finished job
3.4 Covering material is applied, where necessary, to protect existing fixtures and fittings

4 Fit leadlight and stained glass

4.1 Leadlight and stained glass is fixed to the frame or opening using the selected method
4.2 Solvents and sealants are applied
4.3 Leadlight and stained glass and/or frame are cleaned after fixing

5 Finalise the installation

5.1 Completed installation is checked to ensure compliance
5.2 Waste and scrap material are removed for disposal or recycling, as required
5.3 Work area is cleaned and rubbish disposed of, as appropriate
5.4 Tools, equipment and unused materials are cleaned, removed and stored appropriately
5.5 Workplace records are maintained according to workplace procedures

No information

Replaced By

State Code	National Code	Title	Type
OAK03	MSFDG3002	Prepare and install architectural engineered leadlight and stained glass	Unit of competency

State Code	National Code	Title	Type
J732	MSF30413	Certificate III in Glass and Glazing	Qualification
J751	MSF50113	Diploma of Stained Glass and Leadlighting	Qualification