Unit of competency Outline

Date retreived
23/07/2026 12:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce drawings from design concepts

Produce drawings from design concepts

Unit of competency
National Code
MSFDN4001
State Code
WI276
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
20/06/2014
Nominal Hours
64
Description
This unit of competency covers producing manual and computer-aided drawings of furnishing objects from design concepts intended for use in a furnishing industry production or manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for the task
  • 1.1 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.2 Purpose and operational characteristics of object to be drawn are identified
  • 1.3 Production materials and methods are identified
2 Establish design requirements and limitations
  • 2.1 Type of drawing to be completed is identified
  • 2.2 Design concept requirements are established and documented identifying dimensions, angles, shapes and finished size
  • 2.3 Drawing conventions and specifications to be noted on the drawing are identified
  • 2.4 Appropriate medium for drawings is identified and selected
3 Quantify and draft initial drawing
  • 3.1 Dimensions are plotted from prototype sketch and documented specifications
  • 3.2 Dimensional points are connected to match appropriate drawing view
  • 3.3 Any production notes or special requirements are noted
  • 3.4 Drawing conventions and specifications are noted on the documentation
4 Complete drawing
  • 4.1 Angles, shapes and dimensions are checked against specifications and concept prototype drawing
  • 4.2 Adjustments are made to the drawing within scope of authority
  • 4.3 Drawing is checked for compliance with workplace documentation requirements
No information
No information
Replaces
State Code National Code Title Type
W8498 LMFDN4001B Produce drawings from design concepts Unit of competency
Replaced By
State Code National Code Title Type
ODZ65 MSFFDM4014 Produce manual and computer-aided drawings from design concepts Unit of competency