Unit of competency Outline

Date retreived
23/07/2026 12:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce manual and computer-aided drawings from design concepts

Produce manual and computer-aided drawings from design concepts

Unit of competency
National Code
MSFFDM4014
State Code
ODZ65
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/06/2022
View on TGA
State Implementation and Classification
Approved Date
15/11/2022
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
15/11/2022
Nominal Hours
60
Description
This unit describes the skills and knowledge required to produce manual and computer-aided drawings of furnishing or similar products from design concepts.This unit applies to individuals required to create drawings as part of their job role in design, manufacturing and similar workplaces, either alone or as part of an internal or external team.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for drawing work
  • 1.1 Identify product purpose, characteristics and production materials and methods, and assess impact of these on drawing process
  • 1.2 Confirm type of drawing to be developed from information and select appropriate medium and tools
  • 1.3 Set up hardware and software as required in accordance with operating instructions and workplaces procedures
  • 1.4 Identify drawing conventions and specifications for notation on drawing
  • 1.5 Establish and document design concept requirements, identifying dimensions, angles, shapes and finished size
2. Quantify and draft initial drawing
  • 2.1 Accurately plot dimensions from prototype sketch and documented specifications
  • 2.2 Connect dimensional points to match appropriate drawing view
  • 2.3 Accurately note required production information or special requirements
  • 2.4 Note drawing conventions and specifications on documentation
3. Complete drawing
  • 3.1 Check angles, shapes and dimensions against specifications and concept prototype drawing
  • 3.2 Identify and make required adjustments to designs based on review and consultation with relevant people
  • 3.3 Check drawing for compliance with workplaces documentation requirements
  • 3.4 Store data files in accordance with operating instructions and workplaces procedures
No information
No information
Replaces
State Code National Code Title Type
WI276 MSFDN4001 Produce drawings from design concepts Unit of competency