Unit of competency Outline

Date retreived
22/07/2026 10:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct and repair leadlight panels

Construct and repair leadlight panels

Unit of competency
National Code
MSFGG3022
State Code
OAJ19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
56
Description
This unit describes the skills and knowledge required to construct and repair leadlight panels and may involve restoration and conservation of historically important lead lighting works. It includes measuring, design and selection of materials and tools, and disassembly and assembly, weatherproofing and polishing of leadlight panels. This unit applies to individuals working with designed glass.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify work requirements
  • 1.1 Establish safety, quality and functional performance requirements of the panel
  • 1.2 Recognise and respond to the need for research on the historical importance of the panel
  • 1.3 Inspect leadlight panel to be repaired to identify faults and compare any faults found with customer requirements and any previously identified faults
2. Plan leadlight panel construction/repair
  • 2.1 Analyse plan or design of leadlight panel to identify work requirements, methods and specifications
  • 2.2 Identify and follow work health and safety requirements
  • 2.3 Plan steps or stages in construction and/or repair, noting check points for required measurements and tests
  • 2.4 Obtain approval of work construction plan in accordance with workplace procedures
3. Identify suitable materials and equipment
  • 3.1 Select and check tools and equipment for suitability, serviceability and safety prior to use
  • 3.2 Select leadlight construction materials according to specification, matching the original texture, colour, thickness and opacity of the stained glass
4. Construct/repair the leadlight panel
  • 4.1 Follow plan to construct and/or repair the leadlight panel
  • 4.2 Conduct checks at the identified points
  • 4.3 Identify and recommend modifications within workplace procedures
  • 4.4 Document modifications to the plan and seek appropriate approvals in accordance with workplace procedures
5. Complete work
  • 5.1 Inspect leadlight panel for quality of work and repair or reconstruct in accordance with workplace procedures
  • 5.2 Clean and store tools, equipment and materials in accordance with workplace procedures
  • 5.3 Clean work area and leave in a safe condition, and dispose or recycle waste in accordance with workplace protocols
  • 5.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI496 MSFGG3014 Construct and repair leadlight panels Unit of competency