Unit of competency Outline

Date retreived
23/07/2026 7:25 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply patterns and designs to glass

Apply patterns and designs to glass

Unit of competency
National Code
MSFGG3025
State Code
OAJ18
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
32
Description
This unit describes the skills and knowledge required to apply patterns and/or designs to glass surfaces to manufacture decorative glass products. This unit applies to glass processing workers.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify work requirements
  • 1.1 Read work instructions and identify job requirements
  • 1.2 Identify and follow work health and safety requirements, using all required personal protective equipment
  • 1.3 Select and check required tools, equipment and materials for serviceability and safety prior to use
  • 1.4 Plan sequence of work to ensure processing is conducted in a logical order
2. Apply pattern or design
  • 2.1 Produce required template from plan or design using software in accordance with workplace practices
  • 2.2 Apply pattern or design template or mask glass surface with appropriate materials in accordance with job requirements
  • 2.3 Apply pattern or design to glass surface in accordance with workplace procedures or industry practice
  • 2.4 Identify and report problems to appropriate persons, and follow any authorised changes in working procedures
  • 2.5 Inspect product for quality of work and repair or discard in accordance with workplace procedures
3. Complete work
  • 3.1 Label processed glass and store in accordance with workplace procedures ensuring there are no projections
  • 3.2 Clean work area, safely dispose of rubbish and identify items for recycling in accordance with workplace procedures
  • 3.3 Remove and store tools, equipment and unused materials in accordance with workplace procedures
  • 3.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI491 MSFGG3009 Apply patterns and designs to glass Unit of competency