Unit of competency Outline

Date retreived
22/07/2026 9:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply patterns and designs to glass

Apply patterns and designs to glass

Unit of competency
National Code
MSFGG3009
State Code
WI491
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
10/09/2015
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040323 - Glazing
Original Release Date
19/06/2014
Nominal Hours
32
Description
This unit of competency covers applying patterns and/or designs to glass surfaces to manufacture decorative glass products. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Work instructions are obtained and followed
  • 1.2 Work health and safety (WHS) requirements for application of patterns and designs to glass surfaces, including personal protective equipment, are observed throughout the work
  • 1.3 Tools and equipment suitable to the work method are assembled and the process for applying patterns and designs to glass surfaces identified
2 Prepare for work
  • 2.1 Work sequence is planned in a logical order to suit the job and workplace procedures
  • 2.2 Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
  • 2.3 Pattern or design template, if required, is produced from plan or design or drafted from existing design or pattern
  • 2.4 Procedures are identified for checking the quality of materials and items produced and quality requirements for each stage of the application process
3 Apply pattern or design to glass surface
  • 3.1 Pattern or design template is applied or glass surface is masked, as necessary, with appropriate materials
  • 3.2 Pattern or design is applied to glass surface in accordance with workplace procedures or industry practice
  • 3.3 Problems occurring during operation are identified and reported to appropriate personnel in accordance with workplace procedures, and any authorised changes in working procedures followed
4 Complete work
  • 4.1 Product is inspected for quality of work and repaired or discarded, as required, in accordance with workplace procedures
  • 4.2 Waste and scrap material are removed for disposal or recycling, as required
  • 4.3 Work area is cleaned and rubbish disposed of, as appropriate
  • 4.4 Tools and equipment are cleaned and stored following workplace procedures
  • 4.5 Workplace documentation is completed, as required
No information
No information
Replaces
State Code National Code Title Type
S7825 LMFGG3008C Apply patterns and designs to glass Unit of competency
Replaced By
State Code National Code Title Type
OAJ18 MSFGG3025 Apply patterns and designs to glass Unit of competency