Unit of competency Outline

Date retreived
23/07/2026 2:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble leadlight and stained glass components

Assemble leadlight and stained glass components

Unit of competency
National Code
MSFDG2001
State Code
OAK04
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
50
Description
This unit describes the skills and knowledge required to assemble leadlight and stained glass components using a range of fixing and joining components.This unit applies to individuals working with designed glass.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan and prepare for work
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Identify and select tools and equipment based on job requirements and check for serviceability and safety prior to use
  • 1.3 Identify, obtain and prepare materials appropriate to the work application and safely handle and locate ready for use
  • 1.4 Identify workplace environment considerations and apply measures to reduce noise, dust and obstacles
  • 1.5 Plan assembly sequence in a logical order
2. Assemble components
  • 2.1 Lay out components and assemble using jigs and appropriate fastenings
  • 2.2 Use hand and/or power tools, and equipment correctly based on job needs
  • 2.3 Check assembled work for compliance with specifications
  • 2.4 Prepare, assemble and fit components in accordance with specifications
  • 2.5 Repair or tag work which does not meet quality specifications for further processing, recycling or disposal in accordance with workplace procedures
  • 2.6 Organise and store finished products in holding area suited to the product
3. Clean work area and maintain equipment
  • 3.1 Tag and report faulty and/or defective equipment in accordance with workplace procedures
  • 3.2 Remove waste and scrap in accordance with workplace procedures
  • 3.3 Clean and inspect tools and equipment for serviceable condition and store appropriately in accordance with workplace procedures
  • 3.4 Maintain equipment and clean-up work area in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI643 MSFSL2001 Assemble leadlight and stained glass components Unit of competency