Unit of competency Outline

Date retreived
22/07/2026 9:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble copper foil glass components

Assemble copper foil glass components

Unit of competency
National Code
MSFDG3004
State Code
OAK00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
100
Description
This unit describes the skills and knowledge required to assemble copper foil components using a range of fixing and joining components.This unit applies to individuals working with designed glass.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Identify and follow work health and safety requirements and other workplace procedures.
  • 1.2 Use personal protective equipment in accordance with workplace procedures
  • 1.3 Identify job requirements from specifications, drawings, designs, job sheets or work instructions
2. Plan and prepare for work
  • 2.1 Select and service tools and equipment, and identify rectify or report any faults prior to commencement
  • 2.2 Identify and obtain materials appropriate to the work application ensuring they are prepared, safely handled and located ready for use
  • 2.3 Identify and apply environmental workplace considerations and measures to reduce noise, dust and obstacles
  • 2.4 Plan assembly sequence based on job requirements
  • 2.5 Select fixing and joining devices in accordance with types of materials to be joined and job requirements
  • 2.6 Select and check jigs for suitability for the work
3. Assemble components
  • 3.1 Lay out and assemble components using jigs and appropriate fastenings
  • 3.2 Use hand and power tools correctly in accordance with job requirements
  • 3.3 Check assembled work for compliance with specifications
  • 3.4 Prepare, assemble and fit components in accordance with specifications
  • 3.5 Repair or tag work which does not meet quality specifications for further processing, recycling, or disposal in accordance with workplace procedures
  • 3.6 Organise and store finished products in suitable holding area
4. Check work area and maintain equipment
  • 4.1 Tag and report faulty and/or defective equipment in accordance with workplace procedures
  • 4.2 Identify and store items for recycling in accordance with workplace procedures
  • 4.3 Clean work area and safely dispose of rubbish
  • 4.4 Check, clean and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWS58 MSFSL3006 Assemble copper foil glass components Unit of competency
State Code National Code Title Type
BHR1 MSF30422 Certificate III in Glass and Glazing Qualification
BEC9 MSF30418 Certificate III in Glass and Glazing Qualification