Unit of competency Outline

Date retreived
22/07/2026 10:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble glazing products

Assemble glazing products

Unit of competency
National Code
MSFGG2016
State Code
OAJ24
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
25
Description
This unit describes the skills and knowledge required to identify work requirements, prepare for work and assemble components for glazing products. Glazing products may be made from aluminium, steel, timber or unplasticised polyvinyl chloride (uPVC).This unit applies to individuals assembling products in accordance with pre-determined work orders and plans.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify work requirements and components
  • 1.1 Read work documentation and identify assembly requirements
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Plan a logical work sequence suited to the job and workplace procedures
2. Prepare for assembly
  • 2.1 Select and check tools and equipment for suitability, serviceability and safety prior to use
  • 2.2 Select and confirm component parts against specifications
  • 2.3 Check measurements for accuracy, legibility and tolerance, and note and position mating or directional marks
  • 2.4 Set up assembly tools and equipment in accordance with production objectives, manufacturer instructions and workplace procedures
3. Assemble components
  • 3.1 Lay out and assemble components ensuring conformity to specifications, alignment and appropriate fastening
  • 3.2 Attach hardware and fixings in accordance with specifications
  • 3.3 Reveal product once assembled in accordance with job requirements
  • 3.4 Inspect completed product for compliance with specifications and quality requirements, and repair, reprocess or discard in accordance with workplace procedures
4. Complete work
  • 4.1 Label and store completed products in accordance with workplace procedures and Australian Standards
  • 4.2 Clean work area and safely dispose of waste
  • 4.3 Remove and store tools, equipment and unused materials in accordance with workplace procedures
  • 4.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI481 MSFGG2009 Fabricate and assemble frames Unit of competency