Unit of competency Outline

Date retreived
23/07/2026 1:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce manual and computer-aided production drawings

Produce manual and computer-aided production drawings

Unit of competency
National Code
MSFFM3030
State Code
OEJ87
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030101 - Manufacturing Engineering
Original Release Date
19/04/2023
Nominal Hours
52
Description
This unit describes the skills and knowledge required to make manual and computer-aided drawings to support manufacture and assembly in cabinet and furniture making, wood machining and other industries. Workers with this competency use discretion, judgement and problem solving to apply their knowledge of manufacture and assembly to the drawing process. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify drawing task requirements
  • 1.1 Identify function and characteristics of object to be drawn
  • 1.2 Identify purpose of drawings in production process
2. Establish drawing criteria and limitations
  • 2.1 Establish dimensions, tolerance, angles, shapes, finished sizes and other specifications to be recorded in drawings
  • 2.2 Identify appropriate drawing types, views and scales to meet task requirements
  • 2.3 Select appropriate drawing conventions and symbols to meet task requirements
  • 2.4 Select appropriate medium for drawings
3. Draft initial drawing
  • 3.1 Include spatial information in drawings, including angles, shapes and dimensions
  • 3.2 Include non-spatial information in drawings, including production notes and list of materials required for production
  • 3.3 Note drawing conventions and specifications on documentation
4. Complete drawing
  • 4.1 Check angles, shapes and dimensions and other spatial and non-spatial information against specifications and sample, and correct errors
  • 4.2 Check drawing for compliance with workplace documentation requirements
No information
No information
Replaces
State Code National Code Title Type
WI430 MSFFM3009 Produce manual and computer-aided production drawings Unit of competency