Unit of competency Outline

Date retreived
22/07/2026 10:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce manual and computer-aided production drawings

Produce manual and computer-aided production drawings

Unit of competency
National Code
MSFFM3009
State Code
WI430
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030101 - Manufacturing Engineering
Original Release Date
20/06/2014
Nominal Hours
52
Description
This unit of competency covers producing manual and computer-aided production drawings.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify object to be drawn
  • 1.1 The purposes and any operational characteristics of object to be drawn are identified
  • 1.2 Production materials and method are identified
2 Establish drawing criteria and limitations
  • 2.1 Type of drawing to be completed is identified
  • 2.2 Drawing requirements are established and documented identifying dimensions, angles, shapes and finished sizes
  • 2.3 Drawing conventions and specifications to be noted on the drawing are identified
  • 2.4 Appropriate medium for drawings is identified and selected
3 Quantify and draft initial drawing
  • 3.1 Dimensions are plotted from criteria and documented specifications
  • 3.2 Dimensional points are connected to match appropriate drawing views
  • 3.3 Any production notes or special requirements are noted
  • 3.4 Drawing conventions and specifications are noted on the documentation
4 Complete drawing
  • 4.1 Angles, shapes and dimensions are checked against specifications and sample
  • 4.2 Adjustments are made to the drawing within scope of authority
  • 4.3 Drawing is checked for compliance with workplace documentation requirements
No information
No information
Replaces
State Code National Code Title Type
W8618 LMFFM3011B Produce manual and computer-aided production drawings Unit of competency
Replaced By
State Code National Code Title Type
OEJ87 MSFFM3030 Produce manual and computer-aided production drawings Unit of competency