Unit of competency Outline

Date retreived
22/07/2026 7:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out conveyor system shift

Carry out conveyor system shift

Unit of competency
National Code
RIIPEO207E
State Code
OCC81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/09/2020
View on TGA
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to carry out conveyor system shifts in coal mining, including monitoring conveyor shifts, testing conveyor after relocation and returning it to service.It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.No licensing, legislation, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for conveyor shift operations
  • 1.1 Obtain, interpret, clarify and confirm briefings and survey plans
  • 1.2 Access, interpret and apply documentation required for conveyor shift operations
  • 1.3 Carry out site inspection and determine preparation requirements within scope of own role
  • 1.4 Select equipment and/or attachments required for work activities and check for faults
  • 1.5 Identify, address and report potential hazards and risks according to site requirements
  • 1.6 Select and wear personal protective equipment according to site requirements
  • 1.7 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
2. Set up for conveyor shift
  • 2.1 Complete ground preparation works according to job requirements
  • 2.2 Carry out fire service pipe relocation according to job requirements
  • 2.3 Carry out minor maintenance according to job requirements
  • 2.4 Set and prepare anchoring equipment/posts according to job requirements
  • 2.5 Follow plans and confirm appropriate permits are issued to isolate plant
  • 2.6 Release of conveyor belt tension according to job requirements
3. Carry out and monitor conveyor shift
  • 3.1 Communicate personnel and equipment resource requirements within scope of own role
  • 3.2 Prepare conveyor for relocation according to manufacturer specifications and site requirements
  • 3.3 Relocate conveyor according to job requirements
  • 3.4 Monitor sequence of conveyor shift activities within scope of own role
  • 3.5 Diagnose problems and implement response actions within scope of own role
  • 3.6 Complete conveyor shift according to job and site requirement
4. Test and return conveyor to service
  • 4.1 Restore isolated plant according to site requirements
  • 4.2 Carry out test runs with unloaded and loaded belt according to site requirements
  • 4.3 Inspect frames and conveyor belt for alignment, tension and fouling and arrange for minor maintenance as required
  • 4.4 Return conveyor system to service according to manufacturer specifications and site requirements
  • 4.5 Clear site of debris, tools, plant and machinery according to site requirements
  • 4.6 Complete maintenance records and reports according to site requirements
No information
No information
Replaces
State Code National Code Title Type
WH567 RIIPEO207D Coordinate conveyor system shift Unit of competency
State Code National Code Title Type
BFH4 RII30220 Certificate III in Underground Coal Operations Qualification