Unit of competency Outline

Date retreived
22/07/2026 8:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform thermography tests

Perform thermography tests

Unit of competency
National Code
MEM24014
State Code
OFD83
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
03/02/2023
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
030305 - Materials Engineering
Original Release Date
24/05/2023
Nominal Hours
90
Description
This unit of competency has been developed for training of non-destructive testing (NDT) technicians in performing thermography (infra-red) non-destructive tests, including quantitative and qualitative thermography testing. The unit defines the skill and knowledge for passive and active testing of materials, the processing of infra-red images, interpretation of results, report preparation and storage for later comparative analysis. Where interpretation of technical drawings is required, unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required, unit MEM12023 Perform engineering measurements should also be selected. Competence in this unit along with MEM30044 Apply materials technology principles to non-destructive testing may satisfy the requirements of AS 18436.7: Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 7: Thermography. No licensing, legislative or certification requirements apply to this unit at the time of publication. Certification against Australian standards may be achieved where assessment in this unit of competency is carried out in conjunction with an examining authority as described in ISO 9712 Non-destructive testing — Qualification and certification of personnel.Band: B Unit Weight: 4
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from customer specifications, job sheets or work instructions
2. Prepare for thermographic testing
  • 2.1 Liaise with client to ensure safe and effective access to test area and test material
  • 2.2 Identify test material inspection area
  • 2.3 Review relevant standards and codes for requirements relevant to thermographic testing task
  • 2.4 Clean and prepare material for testing using appropriate procedures
  • 2.5 Check and prepare all test equipment in accordance with manufacturers specifications and job specification.
3. Perform thermographic testing
  • 3.1 Select the most appropriate magnetic particle test for the material and/or application
  • 3.2. Set up test equipment in accordance with relevant standards and job specifications
  • 3.3 Carry out thermographic test in accordance with relevant standards and specifications
  • 3.4 Check thermographic testing equipment for defects, and maintain and store in accordance with procedures and manufacturer instructions
4. Interpret and report the results of thermographic tests
  • 4.1 Process thermographic images in accordance with standards and codes and job specifications
  • 4.2 Determine material condition and defects according to standards and codes and job specification acceptance criteria
  • 4.3 Report test results in accordance with enterprise procedures, accepted industry practices and job specifications
  • 4.4 Store and catalogue thermal images for later comparative analysis
No information
No information
Replaced By
State Code National Code Title Type
OFH40 MEM24033 Undertake thermography tests Unit of competency
State Code National Code Title Type
BJC4 MEM50422 Diploma of Engineering - Non-Destructive Testing Qualification