Unit of competency Outline

Date retreived
22/07/2026 1:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake thermography tests

Undertake thermography tests

Unit of competency
National Code
MEM24033
State Code
OFH40
TGA Status
Current
DTWD Status
Pending
Current Release Number
1.00
Current Release Date
04/09/2025
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030305 - Materials Engineering
Original Release Date
Nominal Hours
Description
This unit of competency has been developed for training of non-destructive testing (NDT) technicians in performing thermography (infra-red) non-destructive tests, including quantitative and qualitative thermography testing.The unit defines the skill and knowledge for passive and active testing of materials, the processing of infra-red images, interpretation of results, report preparation and storage for later comparative analysis.Where interpretation of technical drawings is required, unit MEM09229 Read and interpret technical drawings should also be selected. Where the selection and use of engineering measurement is required, unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of hand tools are required unit MEM18001 Use hand tools should also be selected.Where the selection and use of power tools are required, unit MEM18002 Use power tools/hand held operations should also be selected.Band: BUnit Weight: 4Assessment as competent against MEM24033 Undertake thermography tests may contribute to certification against relevant Australian NDT standards where assessment of this unit of competency is carried out in conjunction with an examining authority as described in AS ISO 18436.7 Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel, Part 7: Thermography.
Notes
Elements and Performance Criteria
1. Establish job requirements
  • 1.1 Comply with relevant WHS and regulatory requirements, standards, codes of practice and standard operating procedures (SOPs) for thermography testing
  • 1.2 Identify job requirements from customer specifications, job sheets or work instructions
2. Prepare for thermographic testing
  • 2.1 Liaise with client to explain testing requirements and schedule tests
  • 2.2 Use established safe work practices and personal protective equipment (PPE) in accordance with SOPs
  • 2.3 Identify test material inspection area determine if special access requirements appropriate for the NDT test need to be communicated to the client
  • 2.4 Clean and prepare inspection areas for testing using appropriate procedures
  • 2.5 Check and prepare all test equipment in accordance with manufacturer’s specifications and job specification
3. Perform thermographic testing
  • 3.1 Select the most appropriate thermographic test for the material and/or application
  • 3.2. Set up test equipment in accordance with relevant standards and job specifications
  • 3.3 Carry out thermographic test in accordance with relevant standards and specifications
  • 3.4 Check thermographic testing equipment for defects, and maintain and store in accordance with procedures and manufacturer instructions
4. Interpret and report the results of thermographic tests
  • 4.1 Review conduct of the test and confirm test procedures were applied correctly
  • 4.2 Process thermographic images in accordance with standards and codes and job specifications
  • 4.3 Determine material condition and defects according to standards and codes and job specification acceptance criteria
  • 4.4 Report test results in accordance with enterprise procedures, accepted industry practices and job specifications
  • 4.5 Store and catalogue thermal images for later comparative analysis
No information
No information
Replaces
State Code National Code Title Type
OFD83 MEM24014 Perform thermography tests Unit of competency
State Code National Code Title Type
BOZ1 MEM50425 Diploma of Engineering - Non-Destructive Testing Qualification