Unit of competency Outline

Date retreived
22/07/2026 2:38 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble and fit braking system components

Assemble and fit braking system components

Unit of competency
National Code
AURTTB005
State Code
AXA86
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to assemble and fit braking system components to vehicles. It involves preparing for the task, assembling and fitting brake components, post-fitting testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The braking systems include those of vehicles in all sectors of the industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to assemble and fit braking system components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Procedures and information for assembling and fitting braking system components are sourced and interpreted
  • 1.3 Assembly options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are selected and checked for serviceability
2. Assemble and fit components
  • 2.1 Components are inspected and faults reported
  • 2.2 Components are assembled according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.3 Components are fitted according to safety requirements using installation procedures that comply with manufacturer specifications and tolerances, and without causing damage to components or systems
3. Test components
  • 3.1 Testing procedures and requirements are accessed and interpreted from manufacturer specifications
  • 3.2 Braking system is tested according to manufacturer specifications and adjusted as required
  • 3.3 Failed components are tagged for further work
  • 3.4 Test results are recorded according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use according to workplace procedures
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF398 AURTTB3005 Assemble and fit braking systems and components Unit of competency
Replaced By
State Code National Code Title Type
OAK18 AURTTB015 Assemble and fit braking system components Unit of competency