Unit of competency Outline

Date retreived
22/07/2026 1:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Mechanically stress grade panels

Mechanically stress grade panels

Unit of competency
National Code
FWPCOT3229
State Code
AXL33
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/10/2016
Nominal Hours
30
Description
This unit of competency describes the outcomes required to mechanically stress grade panels with mechanical stress graders and high speed mechanical graders to test panels for strength and durability against set grades. The unit applies to those who mechanically stress grade timber in a forest products factory setting and includes operator maintenance.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for stress-grading
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.3 Obtain type and quantity of panels for stress grading from storage location.
  • 1.4 Plan stress-grading process in line with work order.
2. Set up equipment
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Complete pre start-up checks on equipment to ensure operational effectiveness.
  • 2.3 Set up spray guns or branding rolls for use in line with work order.
  • 2.4 Complete calibration process using verification panels and set grade thresholds in line with organisational procedures.
3. Stress grade panels
  • 3.1 Complete automatic grading process, monitor and adjust material flow to machine.
  • 3.2 Monitor machinery to ensure consistent grade marking and panel appearance in line with industry standards.
  • 3.3 Withdraw samples for independent testing and prepare according to testing procedures.
4. Conduct operator maintenance
  • 4.1 Follow organisational safety procedures to lock out equipment.
  • 4.2 Check and clean photo-electric cells and reflectors in line with environmental protection practices.
  • 4.3 Check and refill spray guns or branding rolls.
  • 4.4 Adjust and maintain mechanical stress grade rollers, auto-feed and load pressure in line with manufacturer’s recommendations.
  • 4.5 Keep stress-grading area clear of dust and debris in line with organisational safety procedures.
  • 4.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D5938 FPICOT3229B Mechanically stress grade panels Unit of competency
Replaced By
State Code National Code Title Type
OAN35 FWPCOT3267 Mechanically stress-grade engineered wood panels Unit of competency
State Code National Code Title Type
BAM5 FWP30316 Certificate III in Sawmilling and Processing Qualification
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification