Unit of competency Outline
Date retreived
22/07/2026 10:04 AM AWST
22/07/2026 10:04 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Mechanically stress-grade engineered wood panels
Mechanically stress-grade engineered wood panels
Unit of competency
National Code
FWPCOT3267
FWPCOT3267
State Code
OAN35
OAN35
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
21/05/2019
Field of Education
030305 - Materials Engineering
Original Release Date
21/05/2019
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to operate mechanical stress-graders or high-speed mechanical graders to test engineered wood panels for strength and durability in a manufacturing facility. The unit applies to individuals who mechanically stress-grade engineered wood panels. Operators generally work under broad or limited direction to complete routine activities related to their own work and take responsibility for their work.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for stress-grading engineered wood panels
- 1.1 Review work order, workplace health and safety requirements, environmental protection practices and emergency procedures for mechanically stress-grading operation and, where required, check with appropriate personnel
- 1.2 Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislative requirements to maintain safe work practices
- 1.3 Obtain the type and quantity of engineered wood panels for stress-grading from a storage location
2. Set up mechanical grading equipment
- 2.1 Use equipment according to workplace safety procedures, manufacturer instructions and environmental protection practices
- 2.2 Complete pre start-up checks on equipment to ensure operational effectiveness
- 2.3 Set up spray guns or branding rolls for use according to work order
- 2.4 Complete calibration process using verification panels, and set grade thresholds according to workplace procedures
3. Stress-grade engineered wood panels
- 3.1 Complete automatic grading process, monitor and adjust the material flow to machine
- 3.2 Monitor machinery to ensure consistent grade marking and panel appearance according to industry standards
- 3.3 Withdraw samples for independent testing and prepare according to testing procedures
4. Conduct operator maintenance
- 4.1 Lock out equipment according to workplace health and safety procedures
- 4.2 Check and clean photo-electric cells and reflectors according to environmental protection practices
- 4.3 Check and refill spray guns or branding rolls
- 4.4 Adjust and maintain mechanical stress-grade rollers, auto-feed and load pressure according to manufacturer recommendations
- 4.5 Keep stress-grading area clear of dust and debris according to workplace health and safety procedures
- 4.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXL33 | FWPCOT3229 | Mechanically stress grade panels | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAM5 | FWP30316 | Certificate III in Sawmilling and Processing | Qualification |
| BAL3 | FWP30416 | Certificate III in Wood Panel Products | Qualification |