Unit of competency Outline

Date retreived
23/07/2026 12:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate winder for shaft sinking

Operate winder for shaft sinking

Unit of competency
National Code
RIIUND303D
State Code
WH720
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
40
Description
This unit describes a participant’s skills and knowledge required to operate a winder for shaft sinking in Metalliferous Mining.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for operating a winder for shaft sinking
  • 1.1 Access, interpret and apply documentation and procedures for operating a winder for shaft sinking and ensure the work activity is compliant
  • 1.2 Receive, interpret and clarify shift changeover details
  • 1.3 Select and wear appropriate personal protective equipment
  • 1.4 Perform equipment and work area pre-start checks
  • 1.5 Check written records for outstanding maintenance/inspections and recorded defects and take action
  • 1.6 Identify, address and report potential risks and hazards
  • 1.7 Carry out start-up procedures, including checking that area is clear for operations
  • 1.8 Adhere to emergency procedures
  • 1.9 Apply dust suppression and extraction methods
  • 1.10 Ensure control cabin is environmentally and ergonomically sound
2. Conduct shaft sinking using manual winder
  • 2.1 Communicate with relevant personnel
  • 2.2 Confirm kibble is ready for operation
  • 2.3 Initiate the system, follow start-up procedures and operate winder, complying with directions from the person in charge
  • 2.4 Monitor and manage winder performance using appropriate indicators
  • 2.5 Adjust speed and movement
  • 2.6 Operate winder (or winders) for shaft sinking operations
  • 2.7 Carry out shutdown procedures
3. Carry out winder inspections
  • 3.1 Isolate and prove isolation of equipment
  • 3.2 Inspect winder and auxiliary equipment and report faults/defects
  • 3.3 Prepare winder for routine servicing
4. Conduct end-of-shift
  • 4.1 Complete all required written documentation
  • 4.2 Pass on end of shift information verbally or in writing and hand over control to oncoming shift
  • 4.3 Ensure control room is clean and tidy
No information
No information
Replaces
State Code National Code Title Type
WB524 RIIUND303A Operate winder for shaft sinking Unit of competency
Replaced By
State Code National Code Title Type
OCD10 RIIUND303E Operate winder for shaft sinking Unit of competency