Unit of competency Outline

Date retreived
22/07/2026 2:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate winder for shaft sinking

Operate winder for shaft sinking

Unit of competency
National Code
RIIUND303E
State Code
OCD10
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/09/2020
View on TGA
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/03/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to operate a manual winder for shaft sinking in coal and metalliferous mining, including energising the system, adjusting speed and movement and monitoring and managing the winder performance.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for operating a winder for shaft sinking
  • 1.1 Obtain, interpret, confirm and clarify shift changeover details
  • 1.2 Access, interpret and apply documentation required for operating a winder for shaft sinking
  • 1.3 Select and wear personal protective equipment according to site requirements
  • 1.4 Perform equipment and work area prestart checks according to site requirements
  • 1.5 Check records for outstanding maintenance and inspections and recorded defects and respond according to site requirements
  • 1.6 Identify and address potential risks, hazards and environmental issues and implement control measures according to site requirements
  • 1.7 Carry out start-up procedures and confirm area is clear for operations according to site requirements
  • 1.8 Apply dust suppression and extraction methods according to site requirements
  • 1.9 Confirm control cabin meets site requirements
2. Conduct shaft sinking using manual winder
  • 2.1 Communicate with relevant personnel within scope of own role
  • 2.2 Confirm kibble is ready for operation
  • 2.3 Initiate the system, follow start-up procedures and operate winder according manufacturer specifications, site requirements, and directions from person in charge of cage
  • 2.4 Monitor and manage winder performance using appropriate indicators
  • 2.5 Adjust speed and movement as required
  • 2.6 Operate winder/s required for shaft sinking operations according manufacturer specifications and site requirements
  • 2.7 Carry out shutdown procedures according manufacturer specifications and site requirements
3. Carry out winder inspections
  • 3.1 Isolate and prove isolation of equipment according manufacturer specifications and site requirements
  • 3.2 Inspect winder and auxiliary equipment and report faults/defects according to site requirements
  • 3.3 Prepare winder for routine servicing according to manufacturer specifications and site requirements
4. Conduct end-of-shift
  • 4.1 Complete documentation according to site requirements
  • 4.2 Pass on end of shift information and hand over control to oncoming shift according to site requirements
  • 4.3 Confirm control room meets site requirements
No information
No information
Replaces
State Code National Code Title Type
WH720 RIIUND303D Operate winder for shaft sinking Unit of competency