Unit of competency Outline

Date retreived
22/07/2026 8:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop and manufacture turned wood patterns

Develop and manufacture turned wood patterns

Unit of competency
National Code
MEM04033
State Code
OEU08
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030713 - Metal Casting And Patternmaking
Original Release Date
19/04/2023
Nominal Hours
27
Description
This unit of competency defines the skills and knowledge required to develop and manufacture turned wood patterns and pattern component parts, including general engineering and master patterns.It applies to patterns manufactured on wood turning equipment based on an understanding of casting and moulding principles. These patterns may be constructed using Timber or timber laminate, and may be further broken don for other pattern types.Where patterns are required to be set up on pattern plates, unit MEM04039 Assemble plated patterns should also be selected.Where the development and manufacture of cast gear patterns is required, unit MEM04026 Develop and manufacture spur gear patterns should also be selected.Where the development and manufacture of cast bevel gears is required, unit MEM04027 Develop and manufacture bevel gear patterns should also be selected.Where the development and manufacture of cast chain gear and sprocket patterns is required, unit MEM04028 Develop and manufacture chain gear and sprocket patterns should also be selected.Where the development and manufacture of cast conveyor screw patterns is required, unit MEM04029 Develop and manufacture conveyor screw patterns should also be selected.Where the development and manufacture of cast marine propellers is required, unit MEM04030 Develop and manufacture propeller patterns should also be selected.Where the selection and use of precision measurement is required, unit MEM12003 Perform precision mechanical measurement should also be selected.This unit should not be selected when unit MEM18014 Manufacture press tools and gauges has already been selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 3
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications
2. Develop and lay out turned wood patterns
  • 2.1 Determine type of turned wood pattern required through application of moulding and/or casting techniques and foundry processes
  • 2.2 Select timber or timber composites to meet specifications
  • 2.3 Calculate pattern parameters based on specifications
  • 2.4 Lay out pattern to specifications, showing tapers, machining allowances, core prints and method of construction
  • 2.5 Develop and manufacture jigs or fixtures that aid turned wood pattern manufacture
3. Manufacture turned wood patterns
  • 3.1 Mark out materials and develop construction to specifications
  • 3.2 Produce pattern or pattern component parts to size and shape using wood patternmaking techniques, tools, equipment and procedures
  • 3.3 Check pattern or pattern component parts for compliance with specifications
  • 3.4 Join and fix pattern component parts to specifications
  • 3.5 Colour code, mark or label pattern in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
OAX27 MEM04010 Develop and manufacture wood patterns Unit of competency