Unit of competency Outline

Date retreived
22/07/2026 9:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install or replace sub-structure members

Install or replace sub-structure members

Unit of competency
National Code
RIICTB304D
State Code
WH168
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
40
Description
This unit describes a participant’s skills and knowledge required to install or replace sub-structure members in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install or replace sub-structure members
  • 1.1. Access, interpret and apply sub-structure members documentation and ensure the work activity is compliant
  • 1.2. Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3. Confirm and apply environmental protection and safety requirements
  • 1.4. Obtain, interpret and implement traffic management signage requirements
  • 1.5. Select and check for faults plant, tools and equipment to carry out tasks
  • 1.6. Select and wear correct personal protective equipment appropriate for work activities
  • 1.7. Identify, confirm, safely handle and locate, ready for use, materials required for the work application
  • 1.8. Identify, address and report hazards, risks and environmental issues
  • 1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Prepare for installation or replacement
  • 2.1.Assess implications of project on bridge load capacity
  • 2.2. Measure dimensions of original components
  • 2.3. Select resources
  • 2.4. Conduct follow up inspection of work
3. Erect major sub-structure members
  • 3.1. Measure and prepare members for installation or replacement of major sub-structure members
  • 3.2. Fit new members
  • 3.3. Apply durability treatments to the new members
  • 3.4. Install connectors to the new sub-structure members
  • 3.5. Remove temporary supports after new members are secured in place
4. Erect minor sub-structure member
  • 4.1. Measure and prepare members for installation or replacement of minor sub-structure members
  • 4.2. Fit new members
  • 4.3. Apply durability treatments to the new members
  • 4.4. Install connectors to the new sub-structure members
5. Clean up
  • 5.1. Clear work area and dispose of or recycle materials
  • 5.2. Clean, check, maintain and store machinery, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCY19 RIICTB304E Install or replace sub-structure members Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification