Unit of competency Outline
Date retreived
22/07/2026 11:11 AM AWST
22/07/2026 11:11 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install or replace sub-structure members
Install or replace sub-structure members
Unit of competency
National Code
RIICTB304E
RIICTB304E
State Code
OCY19
OCY19
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to install or replace sub-structure members in civil construction. This includes assessing the implications of the project on bridge capacities, preparing and erecting major and minor sub-structure members, and applying durability treatments.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install or replace sub-structure members
- 1.1 Obtain, interpret, clarify and confirm work instructions
- 1.2 Access, interpret and apply documentation required to install or replace sub-structure members and confirm work activity is compliant
- 1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
- 1.4 Select and wear personal protective equipment according to site requirements
- 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
- 1.6 Identify, address and report environmental issues, potential hazards and risks
- 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
- 1.8 Identify, confirm, and locate materials required for work application
2. Prepare for installation or replacement
- 2.1 Assess implications of project on bridge load capacity
- 2.2 Measure dimensions of original components
- 2.3 Select resources according to job requirements
- 2.4 Conduct follow up inspection of work according to job requirements
3. Erect major sub-structure members
- 3.1 Measure and prepare major sub-structure members for installation according to job requirements
- 3.2 Fit new members according to job requirements
- 3.3 Apply durability treatments to new members according to job requirements
- 3.4 Install connectors to new sub-structure members according to job requirements
- 3.5 Remove temporary supports
4. Erect minor sub-structure member
- 4.1 Measure and prepare minor sub-structure members for installation according to job requirements
- 4.2 Fit new members according to job requirements
- 4.3 Apply durability treatments to new members according to job requirements
- 4.4 Install connectors to new sub-structure members according to job requirements
5. Conduct clean-up activities
- 5.1 Clear work area and dispose of or recycle materials according to site requirements
- 5.2 Clean, check, perform maintenance on and store machinery, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH168 | RIICTB304D | Install or replace sub-structure members | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGL0 | RII30920 | Certificate III in Civil Construction | Qualification |