Unit of competency Outline

Date retreived
22/07/2026 6:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install mosaic tiling

Install mosaic tiling

Unit of competency
National Code
CPCCWF3006
State Code
OCP09
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit of competency specifies the skills and knowledge required to install mosaic tiles to wall and floors. It includes the cutting and laying out of a pattern or template and the application of the tiles to the required area.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.Licensing, legislative or certification requirements apply to this unit in some states and territories and users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare to install mosaic tiling.
  • 1.1 Read and interpret task work instructions and plan sequence of work.
  • 1.2 Select and use personal protective equipment (PPE) as required for each stage of the task.
  • 1.3 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Prepare materials.
  • 2.1 Prepare work area for mosaic tiling.
  • 2.2 Check mosaic tiles conform to the task size, pattern, colour and characteristics.
  • 2.3 Set out mosaic work to be symmetrical, balanced and to produce minimal waste.
3 Prepare substrate.
  • 3.1 Prepare substrate surfaces.
  • 3.2 Clean surface free of loose material and contaminants ready for tile installation.
4 Install mosaic tiles to flat surfaces.
  • 4.1 Mark prepared mosaic tiles.
  • 4.2 Select adhesive to ensure light-coloured tiles are not darkened and mix according to usage and climatic conditions.
  • 4.3 Apply adhesive to substrate and install mosaic tiles maintaining alignment to the set-out lines and face surface of the tiles.
  • 4.4 Position mosaic tiles prior to final set and adjust to ensure joints are consistent.
  • 4.5 Finish surface flat with tile face flush.
5 Grout tiles.
  • 5.1 Clean and prepare joints to receive grout.
  • 5.2 Mix and apply grout.
  • 5.3 Clean and polish tiles.
  • 5.4 Protect tiles from damage during remaining construction.
6 Clean up.
  • 6.1 Clear work area and dispose of, reuse or recycle materials.
  • 6.2 Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ recommendations.
No information
No information
Replaces
State Code National Code Title Type
W9615 CPCCWF3006A Carry out mosaic tiling Unit of competency
State Code National Code Title Type
BGE1 CPC31320 Certificate III in Wall and Floor Tiling Qualification