Unit of competency Outline
Date retreived
23/07/2026 2:21 AM AWST
23/07/2026 2:21 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Plan a quarry
Plan a quarry
Unit of competency
National Code
FPIFGM4208B
FPIFGM4208B
State Code
D6015
D6015
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
25/06/2012
Field of Education
030901 - Construction Engineering
Original Release Date
25/06/2012
Nominal Hours
120
Description
This unit describes the outcomes required to locate, test and gain approval for a quarry (borrow pit) operation for the purpose of sourcing material for forest roads and track, construction and maintenanceGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPIFGM4208A Plan a quarry
Notes
Elements and Performance Criteria
1. Plan for quarry operation
- 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to planning a quarry are identified and followed
- 1.2. Relevant parties are consulted regarding land tenure and plans are reviewed and analysed prior to locating the quarry
- 1.3. Proposed location for quarry is inspected and the quality and extent of quarry material visually assessed for suitability
- 1.4. End use of quarry material and annual envisaged total quantities are researched, sampled and tested for suitability
- 1.5. Site environmental protection measures are adhered to in line with relevant legislation and regulations
- 1.6. Operational staff and contractors are regularly communicated with during the planning process to ensure smooth operation and progress
- 1.7. Quarry management plan is prepared for approval in line with site procedures
- 1.8. Communication with others is established and maintained in line with OHS requirements
2. Implement quarry operation plan
- 2.1. Quantities required and methods of extracting material from the quarry are selected, based on research and organisational plan
- 2.2. Cost benefit analysis is conducted to assess viability and lifespan of the quarry
- 2.3. Licences or permits required for quarry development are obtained
- 2.4. People, materials and equipment for quarry development are coordinated and scheduled in line with organisational guidelines
- 2.5. Schedule for the site is organised in conjunction with adjacent work plans and road maintenance or construction plans
- 2.6. Processes are established to liaise with relevant parties during the quarry development process
- 2.7. Schedule for the quarry and other documentation are produced and completed in line with OHS guidelines
3. Monitor and review quarry planning
- 3.1. Environmental protection measures are checked to ensure compliance with relevant legislation and regulations
- 3.2. Planning activities are monitored and reviewed for potential improvements
- 3.3. Planning method is reviewed and diagnosed for potential improvements
- 3.4. Planning process and results are recorded and reported to appropriate personnel
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use, maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Relevant parties may include:
individuals, groups or bodies involved with tenure
community or official organisational representatives
environmental agencies/authorities
neighbouring landholders
local authorities
relevant government departments and agencies/authorities
Visual assessment is to include:
visual estimation of the quality and quantity of quarry material available for end use purposes
End use may include:
road construction
road maintenance
track rehabilitation
snig tracks
landings
Testing is to include:
laboratory testing of the material conducted by testing experts to gauge suitability
Environmental protection measures may include:
ground growth
canopy
general forest lean
wind speed and direction
fallen trees
density of trees
ground slope
soil and water protection
ground hazards and obstacles
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
Methods of extraction may include:
with plant and equipment
using blasting methods
Viability and lifespan are to include:
an analysis of the quarry financial viability, based on:
cost-effectiveness
continued quality of the material
longevity of the quarry
Schedule is to include:
development plan for the quarry site
point at which operations occur
Other documentation may include:
maps
topography
plans
reports
Planning activities are to include:
processes for planning, locating, establishing and operating the quarry
Diagnosis is to include:
analysis of the planning process and development procedures to explore improvement potential
Records and reports may include:
producing detailed records and reports outlining the quarry planning process, including:
difficulties
costs
data analysis
efficiency and effectiveness
recommendations for future work
results
and may be:
manual
a computer-based system
other appropriate organisational communication system
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use, maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Relevant parties may include:
individuals, groups or bodies involved with tenure
community or official organisational representatives
environmental agencies/authorities
neighbouring landholders
local authorities
relevant government departments and agencies/authorities
Visual assessment is to include:
visual estimation of the quality and quantity of quarry material available for end use purposes
End use may include:
road construction
road maintenance
track rehabilitation
snig tracks
landings
Testing is to include:
laboratory testing of the material conducted by testing experts to gauge suitability
Environmental protection measures may include:
ground growth
canopy
general forest lean
wind speed and direction
fallen trees
density of trees
ground slope
soil and water protection
ground hazards and obstacles
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
Methods of extraction may include:
with plant and equipment
using blasting methods
Viability and lifespan are to include:
an analysis of the quarry financial viability, based on:
cost-effectiveness
continued quality of the material
longevity of the quarry
Schedule is to include:
development plan for the quarry site
point at which operations occur
Other documentation may include:
maps
topography
plans
reports
Planning activities are to include:
processes for planning, locating, establishing and operating the quarry
Diagnosis is to include:
analysis of the planning process and development procedures to explore improvement potential
Records and reports may include:
producing detailed records and reports outlining the quarry planning process, including:
difficulties
costs
data analysis
efficiency and effectiveness
recommendations for future work
results
and may be:
manual
a computer-based system
other appropriate organisational communication system
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently plan a quarry in line with organisational requirements
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to planning a quarry
following organisational policies and procedures relevant to planning a quarry
planning a quarry in line with regulations and organisational requirements
coordinating personnel to follow planning, communications and scheduling for planning a quarry
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently plan a quarry in line with organisational requirements
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to planning a quarry
following organisational policies and procedures relevant to planning a quarry
planning a quarry in line with regulations and organisational requirements
coordinating personnel to follow planning, communications and scheduling for planning a quarry
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXK55 | FWPFGM4208 | Plan a quarry | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J474 | FPI40111 | Certificate IV in Forest Operations | Qualification |