Unit of competency Outline

Date retreived
22/07/2026 10:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Solve problems in single phase electronic power control circuits

Solve problems in single phase electronic power control circuits

Unit of competency
National Code
UEEIC0042
State Code
OCA30
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to solve problems in single phase electronic power control circuits.This unit includes preparing and solving problems in single phase electronic power control systems. It also includes testing and documenting solutions to single phase electronic power control.Typical single phase electronic power control problems are those encountered in meeting performance requirements and compliance standards, revising control operating parameters and dealing with control malfunctions.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, is required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Notes
Elements and Performance Criteria
1 Identify problems in single phase electronic power control system
  • 1.1 WHS/OHS requirements and workplace procedures are identified and applied
  • 1.2 Hazards are identified, risks are assessed and control measures implemented
  • 1.3 Extent of single phase electronic power control problems are determined from performance specifications, situation reports and consultations with relevant person/s
  • 1.4 Activities are planned to meet scheduled timelines in consultation with relevant person/s
  • 1.5 Tools, equipment and testing devices needed for the work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Solve problems in single phase electronic power control system
  • 2.1 WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
  • 2.2 Single phase electronic power control devices, circuit operation characteristics and applications are used to develop solutions for control problems
  • 2.3 Parameters, specifications and performance requirements in relation to each single phase electronic power control problem are obtained in accordance with workplace procedures
  • 2.4 Approaches to resolving single phase electronic power control problems are evaluated to provide most effective solutions
  • 2.5 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.6 Problems are solved efficiently using sustainable energy practices without waste of materials, damaging apparatus, the surrounding environment or services in accordance with workplace procedures
3 Test and document solutions to single phase electronic power control
  • 3.1 WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
  • 3.2 Solutions to single phase electronic power control problems are tested to determine effectiveness and modified as necessary
  • 3.3 Adopted solutions are documented, including instructions for implementation, incorporating risk control measures
  • 3.4 Justification for solutions used to solve single phase electronic power control problems are documented in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC664 UEENEEI148A Solve problems in single phase electronic power control circuits Unit of competency