Qualification Outline
22/07/2026 4:23 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diploma of Instrumentation and Control Engineering
Diploma of Instrumentation and Control Engineering
UEE51020
BFK6
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 30/07/2025 | Current | Approved |
| 3.00 | 20/12/2022 | Replaced | Approved |
| 2.00 | 24/10/2022 | Replaced | Approved |
| 1.00 | 05/10/2020 | Replaced | Approved |
Description
This qualification covers competencies to install, set up, test, develop, select, commission, maintain and diagnose faults/malfunctions of equipment and systems for the measurement, recording, monitoring and control of physical/chemical phenomenon and related process control systems.
There are 0 minimum work placement hours required for this unit.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
A total of 1600 weighting points comprising:- 1120 core weighting points listed below; plus
- 480 general elective weighting points from the general elective units listed below.
Choose a total of 480 weighting points elective units from the list below, of which between 0 and 180 weighting points can be taken from Group A; and between 0 and 100 weighting points must be taken from Group B; and between 0 and 120 weighting points must be taken from Group C; and between 260 and 480 weighting points must be taken from Group D or all minimum 480 weighting points can be taken from Group D
Up to 180 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. If weighting points are not listed for an imported unit in any other UEE qualification, default weighting will be 10 points.
There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol * on training.gov.au (TGA). Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.
Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
1. Core Units
All core units must be completed.
2. Group A: Imported and Common Elective Units
Between 0 and 180 weighting points can be taken from Group A.
Please refer to the packaging rules for the full details of available options.
3. Group B: General Elective Units
Between 0 and 100 weighting points can be taken from Group B.
Please refer to the packaging rules for the full details of available options.
4. Group C: General Elective Units
Between 0 and 120 weighting points can be taken from Group C.
Please refer to the packaging rules for the full details of available options.
5. Group D: General Elective Units
Between 260 and 480 weighting points must be taken from Group D or all minimum 480 weighting points can be taken from Group D.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| A163 | UEE51011 | Diploma of Instrumentation and Control Engineering | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification
Traineeships and Apprenticeships