Unit of competency Outline

Date retreived
23/07/2026 5:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Troubleshoot measuring and analysis systems

Troubleshoot measuring and analysis systems

Unit of competency
National Code
UEEIC0044
State Code
OCA90
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to troubleshoot measuring and analysis systems. It includes working safely, checking and testing faulty components, reading circuit diagrams and device specifications, applying fault-finding procedures, conducting repairs and completing service documentation.Permits may be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to find and repair faults
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 WHS/OHS risk control measures and workplace procedures are followed in preparation for the work
  • 1.3 Scope of measuring and analysis systems fault is obtained from documentation and/or work supervisor
  • 1.4 Advice is sought from the work supervisor to ensure work is coordinated effectively with others
  • 1.5 Sources of materials required for work are determined in accordance with workplace procedures
  • 1.6 Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Find and repair faults
  • 2.1 WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
  • 2.2 Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Apparatus is inspected and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.4 Fault finding of measuring and analytical equipment and circuit is conducted using measured and calculated values of apparatus parameters in accordance with workplace procedures
  • 2.5 Equipment components are dismantled, as required, and parts stored to protect against loss or damage in accordance with workplace procedures and relevant industry standards
  • 2.6 Faulty components are rechecked and fault status confirmed
  • 2.7 Faulty components are readjusted or replaced in accordance with workplace procedures
  • 2.8 Repaired components are tested in accordance with workplace procedures
  • 2.9 Apparatus is reassembled, inspected, tested and prepared for return to service
  • 2.10 Unplanned situations are dealt with safely and with the approval of relevant person/s
  • 2.11 Fault-finding and repair activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
3 Complete and report fault-finding and repair activities
  • 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2 Work area is cleaned and made safe in accordance with workplace procedures
  • 3.3 Written justification is made for repairs to apparatus, components and materials in accordance with workplace procedures
  • 3.4 Acceptance that the reported fault/s have been repaired is sought from relevant person/s in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC637 UEENEEI121A Trouble shoot in measuring and analysis systems Unit of competency