Unit of competency Outline
Date retreived
22/07/2026 9:07 AM AWST
22/07/2026 9:07 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use instrumentation drawings, specifications, standards and equipment manuals
Use instrumentation drawings, specifications, standards and equipment manuals
Unit of competency
National Code
UEEIC0047
UEEIC0047
State Code
OCA88
OCA88
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031315 - Refrigeration And Air Conditioning Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to use instrumentation drawings, specifications, industry standards and equipment manuals relevant to install, maintain and fault find process controls.Process controls are a system dealing with mechanisms for maintaining the output of a specific process within a desired range. A process is predictable, stable and consistently operating at a target level of performance.It includes applying principles of process control embodied in drawings, industry standards, specifications and equipment manuals; matching equipment with specifications for a given function; and locating and determining connections required between pneumatic, hydraulic and electrical equipment from instrumentation drawings and specifications.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify instrumentation drawings, specifications, industry standards and equipment manuals
- 1.1 Work health and safety (WHS)/occupational health and safety (OHS), risk control measures and workplace procedures are followed
- 1.2 Need for instrumentation drawings, specifications, industry standards or equipment manuals is determined for the work to be undertaken
- 1.3 Instrumentation drawings, specifications, industry standards or equipment manuals required for the work to be undertaken are obtained in accordance with workplace procedures
2 Use instrumentation drawings, specifications, industry standards and equipment manuals
- 2.1 Instrumentation drawings, specifications, industry standards and/or equipment manuals are selected appropriate to the work being undertaken
- 2.2 Instrumentation drawings, specifications, industry standards and equipment manuals are interpreted using information from process controls, instrumentation drawing layouts, conventions and symbols
- 2.3 Dimensions are extracted and applied from drawings and diagrams for application to work being undertaken
- 2.4 Location of equipment is determined from instrumentation drawings and specifications
- 2.5 Connections between pneumatic, hydraulic and electrical equipment are determined from instrumentation drawings and specifications
- 2.6 Equipment manuals are reviewed to ascertain content, format and located information are relevant to the work to be undertaken
3 Convey instrumentation information using drawings and diagrams
- 3.1 Drawing conventions are used in freehand drawing layouts to convey instrumentation information and ideas to others involved in the work to be undertaken
- 3.2 Instrumentation drawing conventions are used to neatly correct freehand original job drawing to show final 'as-installed' arrangement
- 3.3 Corrected drawings are forwarded to appropriate person/s in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC618 | UEENEEI101A | Use instrumentation drawings, specification, standards and equipment manuals | Unit of competency |