Qualification Outline
22/07/2026 7:35 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diploma of Instrumentation and Control Engineering
Diploma of Instrumentation and Control Engineering
UEE51011
A163
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 3.00 | 17/04/2014 | Current | Transition (Replaced) |
Description
Scope
This qualification provides competencies to install, set up, test, develop, select, commission, maintain and diagnose faults/malfunctions of equipment and systems for the measurement, recording, monitoring and control of physical/chemical phenomenon and related process control systems.
Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:- Twenty eight (28) core units and
- A combination of elective units to achieve a total weighting of 480 points:
- A maximum of 180 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 100 weighting points may be chosen from Group B Elective Units
- A maximum of 120 weighting points may be chosen from Group C Elective Units
- A minimum of 260 to a maximum of 480 weighting points to be chosen from Group D Elective Units
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan
Note: UEENEEI112A - Those holding a ‘Certificate II in Instrumentation and Control trade qualification or equivalent’ meet the requirements of this unit and its pre-requisite requirements
1. Core Units
All twenty eight (28) units must be completed
2. Group A Imported and Common Elective Units
Units may be chosen to a maximum of 180 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0760 | BSBINN502A | Build and sustain an innovative work environment | 50 | Unit of competency |
| W7811 | UEENEEE009B | Comply with scheduled and preventative maintenance program processes | 18 | Unit of competency |
| W7740 | UEENEEC010B | Deliver a service to customers | 18 | Unit of competency |
| WB921 | BSBWOR502B | Ensure team effectiveness | 50 | Unit of competency |
| D4868 | BSBMGT516C | Facilitate continuous improvement | 50 | Unit of competency |
| W7731 | UEENEEC001B | Maintain documentation | 18 | Unit of competency |
| D0755 | BSBINM501A | Manage an information or knowledge management system | 40 | Unit of competency |
| D0846 | BSBMGT502B | Manage people performance | 50 | Unit of competency |
| W7822 | UEENEEE020B | Provide basic instruction in the use of electrotechnology apparatus | 18 | Unit of competency |
| W7732 | UEENEEC002B | Source and purchase material/parts for installation or service jobs | 18 | Unit of competency |
| WC385 | UEENEED101A | Use computer applications relevant to a workplace | 18 | Unit of competency |
3. Group B Elective Units
Units may be chosen to a maximum of 100 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.
4. Group C Elective Units
Units may be chosen to a maximum of 120 weighting points from Group C.
Please refer to the Training Package for the full list of unit weighting points.
5. Group D Elective Units
A minimum of 260 to a maximum of 480 weighting points to be chosen from Group D.
Please refer to the Training Package for the full list of unit weighting points.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W869 | UEE51010 | Diploma of Instrumentation and Control Engineering | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFK6 | UEE51020 | Diploma of Instrumentation and Control Engineering | Qualification |
No information
Entry Requirements
Not applicable.
Traineeships and Apprenticeships