Unit of competency Outline
Date retreived
22/07/2026 9:03 AM AWST
22/07/2026 9:03 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Solve problems in density/level measurement components and systems
Solve problems in density/level measurement components and systems
Unit of competency
National Code
UEEIC0038
UEEIC0038
State Code
OCA95
OCA95
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to set up density/level measurement components and systems and provide solutions to a problem as it applies to a process and control work function.It includes working safely, setting up and calibrating density/level measuring components and systems, applying problem-solving techniques, using of a range of measuring devices, and providing solutions derived from measurements and calculations to problems in density/level measurement components and systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to work on density/level measurement components and system
- 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are obtained and applied
- 1.2 Hazards are identified, risks assessed and control measures implemented
- 1.3 Nature of the density/level measurement problem is identified from documentation or appropriate person/s to determine the scope of work to be undertaken
- 1.4 Appropriate person/s is consulted to ensure work is coordinated effectively with others
- 1.5 Materials required for the work are determined in accordance with workplace procedures
- 1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety in accordance with workplace procedures
2 Solve density/level measurement problems
- 2.1 WHS/OHS risk control work measures and workplace procedures are followed
- 2.2 Need to inspect, test or measure electrical components of live electrical work is determined in accordance with job requirements and workplace safety procedures
- 2.3 Density/level measurement apparatus is checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.4 Relevant methods are used to solve measurement problems from tests and calculated values as they apply to density/level measurement systems
- 2.5 Unplanned situations are responded to in accordance with workplace procedures and with the approval of an authorised person/s
- 2.6 Problems are resolved using sustainable energy principles and without damage to apparatus, the surrounding environment or services in accordance with workplace procedures
3 Complete work and document work activities
- 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
- 3.2 Worksite is cleaned and made safe in accordance with workplace procedures
- 3.3 Justification for solutions used to resolve density/level measurement problems is documented
- 3.4 Work completion is documented and appropriate person/s notified in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC620 | UEENEEI103A | Solve problems in density/level measurement components and systems | Unit of competency |