Unit of competency Outline

Date retreived
22/07/2026 10:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct manual fumigation of vertebrate and invertebrate pests

Conduct manual fumigation of vertebrate and invertebrate pests

Unit of competency
National Code
AHCCHM305
State Code
BAR84
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
059901 - Pest And Weed Control
Original Release Date
12/01/2017
Nominal Hours
80
Description
This unit of competency describes the skills and knowledge required to control vertebrate and invertebrate pests by means of manual fumigation. All work must be carried out to comply with workplace procedures, work health and safety and pesticide legislation and codes. All work must be carried out to comply with Safety Data Sheets, chemical label directions and the Integrated Pest Management strategy.This unit applies to individuals who work under broad direction and take responsibility for their own work and use discretion and judgement in the selection and use of available resources. Work is carried out to industry standards.Licensing, legislative, regulatory or certification requirements may apply to this unit. Candidates should confirm the regulatory requirements that apply in their relevant State or Territory before undertaking this unit.This unit may be deemed to have a time limit when used as part of an accreditation or licence process.
Notes
Elements and Performance Criteria
1. Determine type and method of fumigation
  • 1.1 Identify the nature and level of pest presence
  • 1.2 Determine need for fumigant use within an Integrated Pest Management (IPM) strategy
  • 1.3 Determine type of fumigant and application rate
  • 1.4 Select method of fumigant application to suit type of pests and site
  • 1.5 Determine volume to be fumigated to ensure fumigation conditions are met as per label instructions
  • 1.6 Conduct and record work health and safety risk assessment for both fumigation and post fumigation re-entry
2. Prepare to use fumigant according to label and SDS
  • 2.1 Select appropriate personal protective equipment (PPE) as per label requirements and check for effectiveness
  • 2.2 Define and calculate application/dosage rates
  • 2.3 Erect prominent signage notifying passers-by of fumigation operation in progress
  • 2.4 Identify hazards, assess risks and implement control measures
  • 2.5 Prepare fumigation site to control inadvertent entry or exposure
  • 2.6 Implement emergency procedures as required
3. Conduct fumigation
  • 3.1 Confirm first aid equipment is available onsite
  • 3.2 Assess weather conditions and forecasts prior to and during application
  • 3.3 Create airtight seal in fumigation area to ensure maximum effectiveness of fumigation
  • 3.4 Signpost and barricade fumigation site where required to prevent access
  • 3.5 Apply fumigant safely and effectively in accordance with label requirements
  • 3.6 Control site until area is suitable for re-use
  • 3.7 Transport and store fumigants as required
4. Monitor fumigation
  • 4.1 Monitor fumigation site to control access and maintain safe conditions during active period for the time specified on the label
  • 4.2 Monitor fumigation site for pest activity
  • 4.3 Assess fumigant escape safety implications and take immediate action if required
5. Ventilate fumigated area
  • 5.1 Follow label direction to determine when conditions are suitable for ventilation to minimise risk to health and safety
  • 5.2 Calculate time required for ventilation
  • 5.3 Ventilate site in accordance with registered label, SDS, Code of Practice and enterprise standards
6. Clean up following fumigation
  • 6.1 Remove barriers, signs and locks and store for future use in appropriate location
  • 6.2 Clean, decontaminate, check and store equipment and personal protective equipment in appropriate location
  • 6.3 Transport and store fumigants in accordance with label, legislative and industry practice
  • 6.4 Dispose of all waste as per label instructions
7. Record application details
  • 7.1 Record details of fumigant applications
  • 7.2 Record details of fumigant used in the chemical inventory or register
  • 7.3 Maintain inventory of personal protective equipment
  • 7.4 Follow procedures and requirements for reporting fumigation details to management/employer
  • 7.5 Record and report safety incidents or poisoning to the appropriate person or authority
No information
No information
Replaces
State Code National Code Title Type
D6761 AHCCHM305A Conduct manual fumigation of vertebrate and invertebrate pests Unit of competency
Replaced By
State Code National Code Title Type
OAO31 AHCCHM310 Conduct manual fumigation of vertebrate and invertebrate pests Unit of competency