Unit of competency Outline

Date retreived
22/07/2026 10:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply air dry and polyurethane refinishing materials

Apply air dry and polyurethane refinishing materials

Unit of competency
National Code
AURVTP112
State Code
OCI90
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
31/03/2021
Nominal Hours
32
Description
This unit describes the skills and knowledge required to apply air dry and polyurethane refinishing materials to a variety of vehicle components by spray gun application. This unit involves preparing for the task, selecting and using specialist tools and equipment, mixing and applying automotive paint materials according to manufacturer specifications, and completing workplace processes and documentation.The unit applies to those working in the automotive refinishing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
  • 1.3 Identify tools, equipment and chemicals required for repair activity and establish serviceability according to workplace procedures
2. Carry out application activities
  • 2.1 Mix and apply refinishing materials according to workplace procedures, manufacturer’s specifications, workplace health and safety and environmental requirements
  • 2.2 Dry refinishing materials according to workplace procedures
  • 2.3 Check paint finish against manufacturers specifications
  • 2.4 Remove paint surface faults using compounds, polishes and glazes
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWZ45 AURVTP012 Apply air dry and polyurethane refinishing materials Unit of competency